close audio
You Are Here: Front Page » Air Compressor Parts: Belts, Filters, Regulators & More » Coleman Powermate Air Compressor Parts | Master Tool Repair » Coleman, Sanborn Pumps & Parts » Sanborn 130,165 Parts - Master Tool Repair

130 & 165 Pump Parts 040-0221, 040-0222, 040-0429, 040-0430

Coleman, Sanborn Pumps & Parts

Product Details
040-0221, 040-0222, 040-0429, 040-0430 - 130 & 165 Pump Parts
Coleman Powermate Sanborn
Brand: Coleman Powermate Sanborn
Model: 040-0221, 040-0222, 040-0429, 040-0430

Individual Repair Parts

Description:

Repair Parts for Sanborn 130 & 165 Pump 


Click on Specs Tab above before ordering parts for this pump.
 

NOTE!

If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.

040-0221, 040-0222, 040-0429, 040-0430 - 130 & 165 Pump Parts schematic
Click to enlarge and select products
Loading Schematic Information
Close

Repair Kits

{{ kit.products_model }}

Products Not Shown In Image

  • {{ slave.products_name }}
{{ notShownViewer.slave.products_name }}
Name: {{ notShownViewer.slave.products_name }} Price:
Important info:
This product is currently on backorder with no estimated time of arrival.
Important info: The estimated time of arrival for this product is {{ notShownViewer.slave.products_date_available }}.
More Info:
040-0221, 040-0222, 040-0429, 040-0430 - 130 & 165 Pump Parts schematic
Click to enlarge

Product Specifications

  • Min RPM 700
  • Max RPM 1200
  • Max pressure 125 psi
  • Max duty cycle 50%
  • Oil capacity 18 oz.
  • 130 Pump 6.0 cfm @ 90psi (2 HP motor)
  • 165 Pump 10.1 cfm @ 90spi (5 HP motor)
  • 39 lbs.
  • Torque specs (see Schematic on "Description" tab)
  • For 2-4.5HP units, you have a 130 pump
  • For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
  • Make sure of your pump model before ordering these parts or a new pump.
  • New pump comes with felt style air filter. Old canister style not available with new pumps.
  • New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
  • If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.
Extra Details

  • Head bolt torque 220-200 in lbs.
  • Carrier bolt torque 170-230 in lbs.
  • Flywheel bolt torque 150-250 in lbs.
  • Bottom oil pan torque 30-50 in lbs.
  • Connecting rod torque 160-200 in lbs.

 

Tech Pubs

This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.

 

 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.

Displaying 43 products

Buy 2 for 10% off! Buy 3 for 15% off! Buy 4 or more for 20% off! Buy 6 or more for 25% off!

Reference Item Please Note! Price Product Image Select Qty Status
(not shown)130 Pump (No Flywheel)Used on units up to 4.5 HP motors. Pump includes felt filter. Flywheel is not included. NOTE! If ordering a new 130 Pump, you can use the Head...... [+]
Click here for more info
$204.37
$159.00
040-0429 - 130 Pump (No Flywheel)-
(not shown)130 Pump With Flywheel & Air FilterUsed on units up to 4.5 HP. Complete 130 pump with Flywheel & Air Filter. Don't forget air compressor oil! NOTE! If ordering a new 130 Pump,...... [+]$222.71
$198.00
040-0425RP - 130 Pump With Flywheel & Air Filter-
(not shown)165 Pump (coleman Sanborn)For 5 to 6.5 HP units. New Pump with felt air filter to replace original pump. Flywheel NOT included. Simply swap out flywheel, add oil and run. ...... [+]
Click here for more info
$196.98
$159.00
040-0430 - 165 Pump (coleman Sanborn)-
(not shown)165 Pump With Flywheel & Air FilterFor 5 to 6.5 HP units. Complete, new 165 Pump with felt Air Filter and Flywheel. Don't forget the air compressor oil! NOTE! New style pump has...... [+]
Click here for more info
$224.97
$199.00
040-0426RP - 165 Pump With Flywheel & Air Filter-
(not shown)Overhaul Kit (Felt Filter)Overhaul kit for pump. Includes new style valve plate, gaskets, rings and felt air filter. Click 'Specs' before ordering parts.$131.26165-0083 - Overhaul Kit (Felt Filter)-
00002Piston RingsIncludes rings for both pistons for the 130/165 pump.$30.38054-0112 - Piston Rings(X)-
00003PistonPiston for 130 & 165 pump. Includes wrist pin and two retainers.$40.26048-0065 - Piston-
00004aConnecting Rod Up to 4.5hpConnecting Rod up to 4.5HP for 130 pump. Torque 160-200 in. lbs.$22.96-
00004bConnecting Rod for 5 Hp And Up.Connecting Rod for 5 HP and greater for 165 pump. Torque 160-200 in. lbs.$22.96047-0092 - Connecting Rod for 5 Hp And Up.-
Reference Item Please Note!Price Product Image
00005BearingFlywheel end bearing.$25.03-
00006Gasket$4.58046-0149 - Gasket-
00006
16
21A
21B
Gasket Kit for 130/165 PumpsIncludes 6,16,21a,21b gaskets for rebuild. Includes both style oil pan gaskets.$48.84046-0159 - Gasket Kit for 130/165 Pumps-
00007Bearing Carrier with BearingBearing carrier and bearing for flywheel end.$32.15-
00011aFlywheel12" Flywheel, "A" Groove.$44.53044-0064 - Flywheel-
00011bFlywheel10" Flywheel. Measure your flywheel first to be sure. Replace with 12" flywheel above. Also replace belt with longer belt.$0.00(X)NLA
No Info
00012Oil SealReplace when removing crankshaft, bearings or if leaking.$8.17046-0161 - Oil Seal-
00013aCrankshaft for 165 Pump (5 Hp)Replace this also if your crank is grooved or pitted. Make sure you have the correct pump. There is a 130 and 165 pump. They both look the same on...... [+]$61.38053-0043 - Crankshaft for 165 Pump (5 Hp)-
00013bCrankshaft for 130 Pump (up to 4.5hp)Crankshaft for Sanborn 130 pump (up to 4.5HP)$60.55053-0041 - Crankshaft for 130 Pump (up to 4.5hp)-
Reference Item Please Note!Price Product Image
00014BearingRoller bearing. (Older pumps had obsolete bronze bushing, order new pump if damaged)$19.23051-0013 - Bearing-
00014aTeflon Seal$13.34-
00015aCrankcaseObsolete, order new pump.$0.00(X)NLA
No Info
00015bCRANKCASE ASSY 130165For 14 bolt pattern.$160.11-
00016aOil Pan GasketIf replacing crank or rings, replace this gasket. (14 bolt style)$13.04046-0263 - Oil Pan Gasket-
00016bOil Pan GasketIf replacing crank or rings, replace this gasket. (8 bolt style)$19.37046-0150 - Oil Pan Gasket-
00017aOil Pan (14 Hole)Replace if cracked. Order gasket also.$18.53-
00017bOil Pan, (8 Hole). Hand make a gasket from gasket material.$0.00077-0065 - Oil Pan, (8 Hole)(X)NLA
No Info
00019SCREW OIL PLUG$4.90-
Reference Item Please Note!Price Product Image
00020Dipstick$11.51056-0019 - Dipstick-
00021Valve Plate KitClick 'Specs' regarding this part first. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...... [+]
Click here for more info
$42.42043-0142 - Valve Plate Kit-
00021
00024
Valve Plate Assy with FiltersRestore compression and keep your new Valves in good shape with this convenient kit! Poor performance or does air leak out of the intake filter...... [+]
Click here for more info
$57.19043-0142Kit - Valve Plate Assy with Filters-
00021aCylinder GasketAvailable in the 130/165VPGASKETS kit only.$11.34046-0152 - Cylinder Gasket(X)-
00021a
00021b
Valve plate gasketsIncludes (1) 046-0151 and (1) 046-0152 gasket.$31.46130/165VPGASKETS - Valve plate gaskets-
00021bHead GasketAvailable in the 130/165VPGASKETS kit only.$18.39046-0151 - Head Gasket(X)-
00022Head KitThis kit includes: New head as well as compression adaptors for 3/8" or 1/2" supply tubes. (Order head gaskets if needed)$44.48-
00022aAdaptorIf your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, then order this 1/4" NPT x 3/8" Compression adaptor.$6.4968-6-4 - Adaptor-
00022bAdaptorIf your pump has an 'X' in front of the serial number and your supply tube measures 1/2" OD, then order this 1/4" NPT x 1/2" Compression adaptor.$14.47068-0063 - Adaptor-
Reference Item Please Note!Price Product Image
00023INLET FILTER SCREEN 130 165Filter ScreenMetal screen for 130/165 Sanborn style pumps.$11.18S118-0023 - INLET FILTER SCREEN 130 165-
00024aAIR FLTR(WOOLFLT)130 165Felt filter for Sanborn 130/165 style pumps. Approximately 1 1/4" x 4 1/2". Order 2 or 3 for spares. Replace this every 3-4 months if the...... [+]$6.96
$5.57
019-0052 - AIR FLTR(WOOLFLT)130 165-
00024bReplacement Filter Element for (#2) Canister3" diameter, 1 3/8" height. Replace every 3-4 months if air compressor is used frequently. A dirty filter can cause damage to the pump's valves,...... [+]$13.6006 - Replacement Filter Element for (#2) Canister-
00024cAir Filter Assembly (1/2" MPT)Metal Assy, 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock. Uses 06 element.$19.95FS-06-050 - Air Filter Assembly (1/2" MPT)-
00024dAir Filter Element#8 hollow filter for older Sanborn pumps (old wing nut style)(ea.) 2.25" Width & 2.25" Height Protect your pump from damage by keeping clean...... [+]$38.18019-0053 - Air Filter Element-
00028
00029
Air Filter Assembly (1/2" MPT)1/2" MPT x Ht 4.19" x W 4.12" Twist lock$21.90FS-10-052 - Air Filter Assembly (1/2" MPT)-
00029Replacement Element for (#3) Canister4" Diameter. Canister Air Filter Element. Element only for air filter assembly.$13.6010 - Replacement Element for (#3) Canister-

Displaying 43 products

Buy 2 for 10% off! Buy 3 for 15% off! Buy 4 or more for 20% off! Buy 6 or more for 25% off!

Your question about this product has been received!
loading
loading