Campbell Hausfeld Air Compressor Pump Gasket Kit #01AA77

Campbell Hausfeld Air Compressor Pump Gasket Kit includes all main gaskets and o-rings seals.

Important: For v-twin pumps, you'll need to order 2 kits to rebuild the complete pump.

Note: Inlet gasket and oil seal are not included in this kit.

If the compressor pump doesn't seem to pressurize as quickly as it should or is leaking in between the head, valve plate, cylinder, or crankcase while running, there's a good chance you need to install new gaskets. You can spray soapy water on the pump while it's running to inspect if there are any bubbles forming, which would indicate a leak.

Remember to tighten the bolts down to the proper torque specs as noted by the manufacturer.

Specifications

Torque Values:

• 16 Screw, head 42 ft. lb.
• 26 3/8-24 Screw, cylinder 15 ft. lb.
• 30 5/16-18 Screw, connecting rod 14 ft. lb.
• 32 5/16-18 Screw, bearing cap 14 ft. lb.
• 51 1/2” Torque screw, flywheel 50 ft. lb.
• 75 Head-to-valve plate screw 100 in. lb.