CFBN200A - Type 0 #01B199

Replace this seal when replacing the piston / cylinder kit, and if air is leaking from the head at the outlet.

Old Part Numbers: Z-A08548, Z-D29777Broken valve causing slow pump up or no compression at all? Replace this valve plate kit to restore compression (make sure piston and cylinder are not worn as well). NOTE: The D30139 Gasket Kit must be...

Old Part Numbers: D20763, D27254, D20643OEM regulator. The Regulator controls the amount of air to your hose. Replace this if you're not able to adjust the PSI to your hose or if it leaks. 

Old Part Numbers: Z-A04615, A16342, Z-D23584, N036515SV, N039790Pump and motor assembly for air compressors (does not include plastic cover or pump head). NOTE! The four bolt holes in the base of the pump, where the valve plate and head bolt onto,...

Torque head bolts down to 52 in/lbs.

Old Part Numbers: CAC-1213

Old Part Numbers: 5140119-54, SRV250175Air Compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.Specifications MPT Inlet: 1/4 in. FPT...

Also available in Fastener Kit # KK-4929. Torque head bolts down to 52 in/lbs.

THD FORMING

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss to DeWalt. If air leaks from the regulator, or when you...