Description
Old Part Numbers: 150-1143, 641133
Universal Regulator: 4-port, two 1/4" FPT ports and two 1/8" FPT ports (gauges sold separately here). The Regulator controls the amount of air to your hose. Replace this if you're not able to adjust the PSI to your hose or if it leaks.
NOTE: If replacing this on older Craftsman "919" model air compressors in which two gauges are installed on the Regulator, only one of the air pressure guages will work with this regulator; modification may be required (see Extra Details below).
Extra Details
Craftsman Modification Notes:
MODIFY REG0250M FOR 919 CRAFTSMAN UNIT W/2 GAUGES: Install Tee fitting where the safety valve goes into the switch. One port on the Tee is for the safety valve and other port is for the tank gauge.
1 Review
-
4 Port Regulator #07F896
This regulator was the one identified as a replacement for the regulator on a Coleman Powermate CXP0200608. Unfortunately the height of this regulator is slightly more than the height of the original regulator. Consequently it cannot be installed without disassembling the the top half of the replacement regulator. After doing that it would install and once reassembled does work.