Renegade 2 HP Oil-Free Air Compressor

NEW Thomas Air Compressors

Ask a questionAsk a question about this unit
Found under the following brands:


Obsolete, no replacement, none in stock. Click here to contact the manufacturer.
  • 5.0 CFM @ 100 PSI
At (74-decibels) the Thomas T-2820ST Renegade Air Compressor is the quietest 2 HP contractor grade compressor on the market. Delivering 5 cfm at 100 psi it is also the highest output 2 HP compressor available. Its unique 2-cylinder in-line design is one of a kind and is unmatched for smoothness and balance. A solid state start switch and 5-Year Electrical Warranty are also Thomas exclusives and not offered anywhere else. At 13.5 amps it starts effortlessly on 15 amp circuits even when extension cords are used. Like all Thomas machines it is rated for continuous use. This "Cadillac of Portables" sets the standard on what 2 HP compressors should be. Uses include, multiple nail gun operation, drywall texture spraying, HVLP systems, pneumatic impact wrenches, paint spraying, sandblasting, tire inflating, and more.
  • 13-1/2-amp, 2-horsepower, 4-gallon, oil-free twin hot dog compressor
  • 5 cfm at 100 psi; quiet 74 dB; 2-cylinder in-line design
  • Made from durable cast iron
  • Includes manual
  • 20-by-15.6-by-16.5-inches; 71-pounds; 5-year warranty on electrical components

This item fits the following models

  • Air Displacement: 9.0 CFM
  • Air Delivery: 5.0 CFM @ 100 PSI
  • Max pressure: 125 PSI
  • Pressure Switch: Starts compressor @ 100 PSI, Stops Compressor at 125 PSI
  • Motor: 2 HP
  • Capacitor start, capacitor run
  • Tanks Capacity: 4 gallons
  • Shipping Weight 71 lbs.
  • Net Weight 66 lbs.
  • Dimensions: 20" x 15.6" x 16.5"
  • Voltage: 115 VAC
  • Amp Draw: 13.5
  • Recovery Time: 9 seconds
  • RPM: 1,700
  • Decibel Rating: 74 dB
  • Finish Guns: 5+
  • Framing Guns: 3+
  • Roofing Guns: 3+

Extra Details:

Click here for a full Spec Sheet

The many benefits of the Thomas Oil-Free Air Compressor:

  • Quiet Running-Only 74 dba's
  • Higher CFM Delivery
  • Designed to Run on 15 Amp Circuits
  • Designed to Run on Extension Cords
  • All Steel/Aluminum Construction (No Plastic Shrouds)
  • Built for Contractors, in Sheboygan, Wisconsin
  • Rated for Continuous Use (100% Duty Cycle)
  • Ball Bearing Construction Throughout
  • Will Start and Run in Cold Weather
  • Extremely Well Balanced (no walking)
  • Run at Any Angle (will not run tight)
  • Fast, Easy, Low Cost Rebuilds
  • No Maintenance Costs or Downtime
  • No Oil to Add, Change or Spill