close audio
You Are Here: Front Page » Air Compressor Parts: Belts, Filters, Regulators & More » Coleman Powermate Air Compressor Parts | Master Tool Repair » Coleman Sanborn Portable Air Compressor Parts » Oil Free Pumps » Coleman Powermate Sanborn FL-040-0242 Parts - Master Tool Repair

Air Compressor Pump Parts FL-040-0242

Coleman Sanborn Oil-Free Pumps Parts

Product Details
FL-040-0242 - Air Compressor Pump Parts
Coleman Powermate Sanborn
Brand: Coleman Powermate Sanborn
Model: FL-040-0242

Individual Repair Parts


Repair Parts for Coleman Powermate Sanborn FL-040-0242 Air Compressor Pump

FL-040-0242 - Air Compressor Pump Parts schematic
Click to enlarge and select products
Loading Schematic Information

Repair Kits

{{ kit.products_model }}

Products Not Shown In Image

  • {{ slave.products_name }}
{{ notShownViewer.slave.products_name }}
Name: {{ notShownViewer.slave.products_name }} Price:
Important info:
This product is currently on backorder with no estimated time of arrival.
Important info: The estimated time of arrival for this product is {{ notShownViewer.slave.products_date_available }}.
More Info:
FL-040-0242 - Air Compressor Pump Parts schematic
Click to enlarge

Extra Details

  • When replacing the 048-0074M piston/cylinder kit, do not push the piston in the cylinder from below or this will damage the piston ring and void your warranty. ALWAYS pull the connected rod down through the cylinder until it is 1/2 way down the cylinder, then slide the connecting rod down through the aluminum housing and turn crank until the rod will slide over the bearing.
  • Tighten the connecting rod to the crank to approx. 40-50 in lbs. DO NOT OVER TIGHTEN!
  • If your eccentric/crankshaft has any wear and your new piston/cylinder kit is not tight on the eccentric/crankshaft, a small amount of your new connecting rod ID may need to be removed. To do this, simply remove the retaining screw of the connecting rod, insert the connecting rod in a vise and take a hacksaw and make a cut where the connecting rod joins together (below the screw you just removed), just one hacksaw blade width. This will allow you to tighten your screw up a little more on the eccentric/crankshaft.
  • Make sure to keep the air filter (002) clean. Grit will destroy your new piston and cylinder!

This pump was used on over 100 models.
(Many have 048-0088 on connecting rod for piston)

Too much to repair? Click here for a New comparable unit!

 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.

Displaying 12 products

Buy 2 or more for 10% off!

Reference Item Please Note! Price Product Image Select Qty Status
(not shown)Seal KitMost important rubber seals for your pump. (piston ring not available, order 048-0074)$0.00046-0234 - Seal Kit(X)NLA
No Info
00002Air Filter$0.00019-0152 - Air Filter(X)NLA
No Info
No Info
00008(0008) O-ringTop o-ring

Buy 2 or more for 10% off!

$9.84054-0157 - (0008) O-ring-
00009(0009) Intake sealIntake seal for valve plate.

Buy 2 or more for 10% off!

$9.46046-0231 - (0009) Intake seal-
00010Valve Plate Assby.$0.00S043-0151 - Valve Plate Assby.(X)NLA
No Info
00011Piston Cylinder Kit

Kit includes: piston, rod, cylinder, and o-ring. Note: Bearing screw must be torqued to 40-50 in. lbs. No compression usually means a worn piston and

... [+]

Buy 2 or more for 10% off!

Click here for more info
$133.72048-0074 - Piston Cylinder Kit-
00013CapacitorStart capacitor w/ cover (black)

Buy 2 or more for 10% off!

$156.03Factory B/O, no ETA
00015CapacitorSilver run capacitor 1-3 HP. Click Here to view part 25 UF, 50/60 HZ, 370 VAC

Buy 2 or more for 10% off!

$171.66166-0120 - CapacitorFactory B/O, no ETA
Reference Item Please Note!Price Product Image
00017Complete Pump/motor Assby.Bolt on to your existing tank assembly. Ready to go. OBSOLETE$0.00040-0244 - Complete Pump/motor Assby.(X)NLA
No Info
00021SHROUD 123 SERVICE KITKit includes: right, left shrouds plus screws.

Buy 2 or more for 10% off!

No Info

Displaying 12 products

Buy 2 or more for 10% off!

Your question about this product has been received!
Just Arrived!

Every shop needs one!



$14.04 $9.95