MPA1982054 #01B3B3

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port. The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time restarting when trying to cycle or your pressure switch...

Old Part Numbers: 60-4-61-4, 058-0017-MAT1/4" compression nut and sleeve. Order two, one for each end of the tube.

Old Part Numbers: 019-0052Felt air intake filter for Sanborn 130/165 style air compressor pumps. Order 2 or 3 for spares. Replace this every 3-4 months if the compressor is used frequently. A clean filter allows your pump to operate at its max...

Old Part Numbers: 154-4L500Air compressor v-belt, 4L500. Replace if frayed or slipping.Specifications A-type belt, 1/2" wide Outside Dimension: 50" "A" Belt Conversion: A48

Old Part Numbers: 68-6-41/4" NPT x 3/8" OD compression adapter for air compressors. If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, order this part.

Old Part Numbers: PG0250300BTBottom-mount, 1/4" MPT, 300 PSI air compressor pressure gauge.Specifications NPT: 1/4" Dial / Face: 2" PSI: 300 PSI Bottom-Mount 

For 753H pump (Two required). NOTE: New Conrods do not have Insert Bearings, change in manufacturer of the Conrod. Bearings are machined into the casting of the Rod.

Crankcase breather assembly for air compressor models with threaded type crankcase for the breather. This assembly tightens into the crankcase; typically has an oil-level sight gauge.