California Air Tools 2.0 HP SMART Ultra-Quiet & Oil-Free 10-Gallon Air Compressor in Sound Proof Cabinet and Automatic Drain Valve #11673E

The California Air Tools 10020SMSPCAD 2.0 HP SMART Ultra-Quiet & Oil-Free 10-Gallon Air Compressor in Sound Proof Cabinet and Automatic Drain Valve is designed to be one of the quietest 2.0 HP air compressors in the industry having only 58 decibels of sound.   

What makes this "SMART" unit unique is the MDR2i OLED Smart Controller, which may be connected to mobile phones, tablets, notebooks, or computers. The controller can be used as an access point or can be connected to a Wi-Fi network. Compressor features and parameters may be entered and controlled comfortably, along with remote monitoring.

The powerful 2.0 HP motor operates at only 1,680 RPM creating less noise, vibration and creating less wear. The Oil-Free Dual Piston Pump System is  engineered for longevity, high performance and durability.

The SP-9421 Motor/Pump is tested for a minimum pump life of 3,000 hours before service, that's 30% more life before repair. The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

The large 10-Gallon Steel air tank and Soundproof Cabinet is 190 lbs.

The two cabinet exhaust fans are used to remove air from the cabinet to reduce heat and provide a cooler working condition for the air compressor.

The 4 caster wheels makes moving the air compressor from location to location very easy.

The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining your air compressor air tank.

The manually set timer allows you to set the time for both the frequency and duration of the draining process.

The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition  allowing the motor to spin freely. This no-load start up requires less amps for a easier  start up in cold temperatures.

Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!

*70/30 Duty Cycle – Click Here For More Information

• HP: 2 HP
• Decibel Rating: ultra-quiet, only 58 dB
• Pump Type: Twin-cylinder oil-free, direct-drive (cleaner air for better tool operation)
• Max PSI: 125 PSI
• CFM Delivery: 6.40 CFM @ 40 PSI / 5.30 CFM @ 90 PSI
• Voltage: 110V/60 Hz/Single-Phase
• Amperage: Dedicated 15 amp outlet -14 gauge 25ft cord – Min. 5500 Watt Generator
• Time to fill tank from empty to full: 120 seconds
• Recovery time from 95 PSI to 125 PSI: 25 seconds
• Duty Cycle: 70/30
• Tank Capacity: 10-gallon steel air tank (non-ASME)
• Weight: 145 pounds
• Dimensions (LxWxH): 19.75" x 19.75" x 31.5"
• Warranty: 1-year limited

EZ-1-2321 Automatic Drain Valve

• Timer Manual TEST switch
• Valve Body- Forged brass
• Bright lights for a clearer indication of operating status.
• In/Out Ports - 1/4" NPT Female
• For use with 110 volts outlets
• Product: 3.5" (D) x 4.5" (H) x 1.5" (W) - 1.5 lbs
• Max. Working Pressure - 230 PSI
• 1 Year Limited Warranty

Replace 2 HP Air Filters (2 are attached to motor-pump) every 2 years or every year if compressor is exposed to a dirty or dusty environment. Part number 90260.

• Regulated output pressure gauge
• Pressure Regulator (0-120 PSI)
• Working Pressure 90-120 PSI (+/-5 PSI). Adjustable up to 105 PSI Kick-On; 130 PSI Kick-Off maximum
• One (1) Female Industrial “Push to Connect” quick connector (1/4″ NPT)
• MDR2i OLED Smart Controller for remote monitoring and control
• Thermal Overload Protector
•  
• Easy Start Valve  – For Less Starting Amperage
• Less heat which dissipates more efficiently
• Comes complete with two (2) air filters
• 10-Gallon Steel Air Tank With Sound Proof Cabinet and Swivel Caster wheels
• Manufactured in Mexico-USA. Assembled in USA using global components.
• Commercial Use: Refer to State & City Codes

Click here to view the MDR2i Smart Controller Owner's Manual

Click here to view the 10020SMSPC Owner's Manual

Click here to view wiring instructions for the MDR2i Smart Controller