California Air Tools 2.0 HP Ultra-Quiet Oil-Free 10-Gallon Air Compressor with 80% Air Dryer 220V / 60Hz #116756

The California Air Tools 10020DC (220V/60Hz) Ultra-Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 HP air compressors in the industry having only 70 decibels of sound.

The powerful 2.0 HP motor operates at only 1,680 RPM creating less noise, vibration and creating less wear.

The Oil-Free Dual-Piston Pump System is engineered for longevity, high performance and durability.

The SP-9421-22060 Motor/Pump is tested for a minimum pump life of 3,000 hours before service (30% more life before repair).

The SP Series of Ultra-Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

The large 10-gallon steel air tank is only 91 lbs.

The 80% Air Dryer is specially designed to remove the water vapor from the air to protect sensitive tools and machinery. To dry the air from the air compressor an Aftercooler and 80% Air Dryer are utilized.

The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dryer.

This air compressor is ideal for anyone working inside (office, shop, store, warehouse or home) where noise is a major issue.

*70/30 Duty Cycle – Click Here For More Information

• HP: 2 HP
• Decibel Rating: ultra-quiet, only 70 dB
• Pump Type: oil-free, direct-drive, twin-cylinder (cleaner air for better tool operation)
• Max PSI: 125 PSI
• CFM Delivery: 6.40 CFM @ 40 PSI / 5.30 CFM @ 90 PSI
• Voltage: 220V/60 Hz (No 208 Volts)
• Amperage: Low amp draw - 7.5 amps
• Time to fill tank from empty to full: 130 Seconds
• Recovery time from 95 PSI to 125 PSI: 40 Seconds
• Duty Cycle: 70/30
• Tank Capacity: 10-gallon steel air tank with wheel kit (non-ASME)
• Weight: 91 pounds
• Dimensions (LxWxH): 16" x 23" x 35"
• Warranty: 1-year limited

• 80% Air Drying System
• Kick On Pressure 95 PSI  – Kick Off Pressure 125 PSI
• Two pressure control gauges
• One female industrial "Push to Connect" quick connectors
• Thermal Overload Protector
• Plug Type: Nema 6-15P
• Generator with 3,000 Running Watts
• Less heat which dissipates more efficiently
• Air Dryer – Includes Activated Alumina desiccant with a 4,000 hour life.
  • Activated Alumina is used in air prepurification (due to it’s high water and carbon dioxide adsorption capacity) and adsorption of sulphur compounds
• Aftercooler (condenser)
• Comes complete with wheel kit & two (2) air filters
• Commercial Use: refer to state & city codes
• Assembled in USA with global components

NOTE 1: To efficiently operate (1) each Dental Milling Machine continuously a 2.0 or 4.0 HP model is typically required, depending on operating CFM (L/MIN) and average run time. Click here for more information.

NOTE 2: May not be suitable for applications requiring extremely low pressure dew points (PDP) below 2C or 36F. If ISO compliance is required (i. e. ISO 8573 2.3.1 with PDP performance of -29F to -50F) then a desiccant-based air dryer system will be required. California Air Tools offers 6 Ultra-Dry air compressor models which achieve a PDP average of -40F (-40℃) and outputs 98% ultra dry/clean air with 0.01 um particulate filtering.

_____________________________________________________________________________________