California Air Tools Powerful 2.0 HP SMART Ultra-Quiet & Oil-Free 10-Gallon Stationary Air Compressor with 80% Air Dryer and Automatic Drain Valve #11673C
- Shipping:
- Calculated at Checkout
- Description
- Specifications
- Fits Models
- 0 Reviews
- Requirements
- Extra Details
- Manuals
- Extras
- Technical Publications
- Video
Description
The California Air Tools 10020DSMAD Powerful 2.0 HP SMART Ultra-Quiet & Oil-Free 10-Gallon Stationary Air Compressor with 80% Air Dryer and Automatic Drain Valve is designed to be one of the quietest 2.0 HP air compressors in the industry having only 70 decibels of sound.
What makes this "SMART" unit unique is the MDR2i OLED Smart Controller, which may be connected to mobile phones, tablets, notebooks, or computers. The controller can be used as an access point or can be connected to a Wi-Fi network. Compressor features and parameters may be entered and controlled comfortably, along with remote monitoring.
The powerful 2.0 HP motor operates at only 1,680 RPM creating less noise, vibration and creating less wear. The Oil-Free Dual Piston Pump System is engineered for longevity, high performance and durability.
The SP-9421 Motor/Pump is tested for a minimum pump life of 3,000 hours before service, that's 30% more life before repair. The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*
The large 10-gallon steel air tank is only 91 lbs.
The 80% Air Dryer is specially designed to remove the water vapor from the air to protect sensitive tools and machinery.
To dry the air from the air compressor an Aftercooler and 80% Air Dryer are utilized. The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dryer.
The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining your air compressor air tank.
The manually set timer allows you to set the time for both the frequency and duration of the draining process.
The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for a easier start up in cold temperatures.
Designed for the person looking for Power, 80% Dry Airand Less Service with at Least 30% Less Noise! Ideal for Dental, Milling, Bio-Tech, Manufacturing, Packaging, Restaurant and General Engineering Applications.
*70/30 Duty Cycle – Click Here For More Information
Specifications
- HP: 2 HP
- Decibel Rating: ultra-quiet, only 70 dB
- Pump Type: Twin-cylinder oil-free, direct-drive (cleaner air for better tool operation)
- Max PSI: 125 PSI
- CFM Delivery: 6.40 CFM @ 40 PSI / 5.30 CFM @ 90 PSI
- Voltage: 110V/60 Hz/Single-Phase
- Amperage: Low amp draw - 14 amps
- Time to fill tank from empty to full: 130 seconds
- Recovery time from 95 PSI to 125 PSI: 40 seconds
- Duty Cycle: 70/30
- Tank Capacity: 10-gallon steel air tank
- Weight: 95 pounds
- Dimensions (LxWxH): 16" x 23" x 35"
- Warranty: 1-year limited
EZ-1-2321 Automatic Drain Valve
- Timer Manual TEST switch
- Valve Body- Forged brass
- Bright lights for a clearer indication of operating status.
- In/Out Ports - 1/4" NPT Female
- For use with 110 volts outlets
- Product: 3.5" (D) x 4.5" (H) x 1.5" (W) - 1.5 lbs
- Max. Working Pressure - 230 PSI
- 1 Year Limited Warranty
Requirements
DRY AIR SYSTEM MAINTENANCE:
Recommended replacement of 1-lb bag of desiccant, located within vertical dry air tower, every 3,000-4,000 motor/pump running hours (1-2 years/average).
Replace 2 HP Air Filters (2 are attached to motor-pump) every 2 years or every year if compressor is exposed to a dirty or dusty environment. Part number 90260.
Extra Details
- Regulated output pressure gauge
- Pressure Regulator (0-120 PSI)
- Working Pressure 90-120 PSI (+/-5 PSI). Adjustable up to 105 PSI Kick-On; 130 PSI Kick-Off maximum
- One (1) Female Industrial “Push to Connect” quick connector (1/4″ NPT)
- MDR2i OLED Smart Controller for remote monitoring and control
- EZ-1-2321 Auto Drain Valve factoy installed
- Thermal Overload Protector
- Easy Start Valve – For Less Starting Amperage
- Less heat which dissipates more efficiently
- Comes complete with two (2) air filters
- 10 Gallon Steel ASME Certified Air Tank (non-ASME)
- Air Dryer – Includes Activated Alumina desiccant with a 4,000 hour life.
- Activated Alumina is used in air prepurification (due to it’s high water and carbon dioxide adsorption capacity) and adsorption of sulphur compounds.
- Aftercooler (condenser)
- Manufactured in Mexico-USA. Assembled in USA using global components.
- Commercial Use: Refer to State & City Codes
Extras
Includes MDR2i OLED Smart Controller for remote monitoring and control
- Programmable ON/OFF Times
- Pressure ON Level
- Pressure OFF Level
- Unloader Relay Delay
- AutoDrain Time
- Drain Valve Time
- Overcurrent Limit
- Pressure Units
- Total Active (Motor-Pump) Running Hours
The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining air compressor air tanks
- No time required to drain the air tank.
- Automatically removes the water from the air tank when desired.
- Removes water from the tank for better air compression in the air tank.
- Helps prevent the air tank from rusting.
- Prolongs the life of the air tank.
- Prevents water from traveling to the air compressor pump/motor.
- Helps remove moisture from entering the air line.
- Prevents water damage and wear of air tools.