California Air Tools Powerful 4.0 HP SMART Ultra-Quiet & Oil-Free 60-Gallon ASME Stationary Air Compressor with Automatic Drain Valve #116732

The California Air Tools 60040SMAD 4.0 HP SMART Ultra-Quiet & Oil-Free 60-Gallon Stationary Air Compressor is designed to be one of the quietest 4.0 HP air compressors in the industry, having only 75 dB of sound.

What makes this "SMART" unit unique is the MDR2i OLED Smart Controller, which may be connected to mobile phones, tablets, notebooks, or computers. The controller can be used as an access point or can be connected to a Wi-Fi network. Compressor features and parameters may be entered and controlled comfortably, along with remote monitoring.

The Powerful Twin 2.0 HP (SP-9421-22060) motors operates at only 1,680 RPM, creating less noise and less wear. The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*

The Oil-Free Dual-Piston Pump System is engineered for high performance and durability. The 60040SMAD Air Compressor has a Oil-Free Dual-Piston pump designed to have a life cycle before wear of 3,000+ hours. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump).

The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining your air compressor air tank. The manually set timer allows you to set the time for both the frequency and duration of the draining process (Factory Pre-Set).

Designed for the person looking for Power, Air Flow and Less Service with at Least 30% Less Noise! The large 60 Gallon Steel ASME Air Tank is just the right size for shop or garage.

* 70/30 Duty Cycle

• HP: 4 HP (twin 2 HP motors)
• Decibel Rating: ultra-quiet, only 75 dB
• Pump Type: Twin oil-free, direct-drive, twin-cylinder (cleaner air for better tool operation)
• Max PSI: 125 PSI
• CFM Delivery: 12.80 CFM @ 40 PSI / 10.60 CFM @ 90 PSI
• Voltage: 220V/60 Hz/Single-Phase (No 208 Volts - if necessary, obtain 208 to 220 voltage booster). Acceptable Range: 215 VAC – 245 VAC
• Amperage: Low amp draw - 14 amps
• Time to fill tank from empty to full: 6-1/2 minutes
• Recovery time from 95 PSI to 125 PSI: 2 minutes
• Duty Cycle: 70/30
• Tank Capacity: 60-gallon steel air tank (ASME certified)
• Weight: 328 pounds
• Dimensions (LxWxH): 35" x 28" x 68"
• Warranty: 1-year limited

Replace the 98% Air Dryer Cannister/Cartridge every 4,000 operating hours (~2 years on average).

Replace 2 HP Air Filters (2 are attached to motor-pump) every 2 years or every year if compressor is exposed to a dirty or dusty environment. Part number 90260.

• 5 Micron Air Filter & Regulator with a 3/8" Port
• EZ-1-2301 Auto Drain Valve Factoy Installed
• Regulated output pressure gauge
• Air Hose Port, Female, 3/8″ NPT
• MDR2i OLED Smart Controller for remote monitoring and control
• Thermal Overload Protector
• Easy Start Valves  – For Less Starting Amperage
• Plug Type: Nema 6-15P (fits Nema 6-15R or 6-20R receptacle)
• Maximum continuous running 30-60 min. (depending on PSI & CFM)
• Less heat which dissipates more efficiently
• Comes complete with four (4) air filters
• 60 Gallon Steel ASME Certified Air Tank
• Manufactured in Mexico-USA. Assembled in USA using global components.
• Commercial Use: Refer to State & City Codes

Click here to view the MDR2i Smart Controller Owner's Manual

EZ-1-2301 Auto Drain Valve Factory Installed

The California Air Tools EZ-1 Automatic Drain Valve has been designed to eliminate manually draining air compressor air tanks. The manually set timer allows you to set the time for both the frequency and duration of the draining process. The easily installed and removed this forge brass drain valve is durable and built for industrial use.

Click here to view wiring instructions for the MDR2i Smart Controller

_________________________________________________________________________________________________________________________