Condor MDR1 Pressure Switch, 115/150 PSI, 4-Port, 3/8" Female BSP #1166B2
(No reviews yet)
Write a Review
- Shipping:
- Calculated at Checkout
Description
The Condor 10JH2MDE OEM pressure switch replacement is an MDR1 style, 4-port, 3/8" female BSP pressure switch with manual on/off switch and 90-degree compression-style unloader valve and is preset to 115/150 PSI.
Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI), if the unit doesn't turn on or off, or if there is an obvious air leak from the contacts or manifold.
If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, don't replace this part, replace the in-tank check valve. Most pressure switches have a bleeder valve which has a 1/4" plastic or copper line routing to it.
Specifications
- OEM Part Number: 10JH2MDE
- Pressure Settings: 115/150 PSI (6.5/8.5 BAR)
- Manifold Type: 3/8" female BSP, 4-port
- Auto/Off Function: Yes
- Unloader Type: 6mm straight push connect-delayed (AEVS)
- Weight: 0.66 lbs
- Strain Relief - Left: PG11Z
- Strain Relief - Right: PG11ZK
Technical Documents
| Rated insulation voltage (Ui) | = 500 V |
| Motor switching capacity (AC 3) | = [Ue=240 V (1~)] 4.0 kW |
| Electrical life (AC 3) (cycles) | > 1 x 105 |
| Mechanical life (cycles) | > 5 x 105 |
| Max. electrical cycles (Cycles/h) | = 120 |
| Max. mechanical cycles (Cycles/h) | = 600 |
| Rated operational current Ie (EN 60947) [at 240 V AC] | = 20 A |
| Bursting strength Pz | > 35 bar |
| Permissible medium temperature Air | = -5...+80 °C |