Conrader

*Please Note: The typical lead time for this part is 2-3 weeks In-Tank Check Valve, 1/4 Inch Inlet FNPT, 1/2 Inch Outlet MNPT, 20 SCFM. If the small unloader (bleeder) valve on or under your switch...

1/2" Inverted Flare x 1/2" MPT with 1/8" FPT side port. If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, replace this part. The check valve is...

Old Part Numbers: CTB11141" FPT x 1-1/4" MPT with 1/8" FPT side port. If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, replace this part. The...

CTB1412 hose barb fitting for air compressor in-tank check valve. A hose barb is defined as one or more continuous ridges or bumps on a fitting that are used to grip the inside diameter of a...

Air compressor check valve, 3/4" Compression x 3/4" MPT with 1/8" FPT side port.  If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, replace...

Old Part Numbers: PACP434, CV4x4TA1/2" FPT x 1/2" MPT air compressor check valve with 1/8" FPT side port. If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit...

Old Part Numbers: CTD1238, CTD1238SHORT, PN4671, 4480-CR1/2" Compression X 3/8" MPT with 1/8" FPT side port. If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the...

1/2" Flare (#8) x 1/2" Male NPT for tank. Use this for transfer tubes that have flare adapter on one end. If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit...