Condor MDR11 Pressure Switch, 135/175 PSI, 4-Port, 1/4" Female NPT #0E3AE0

(No reviews yet) Write a Review
Shipping:
Calculated at Checkout
  • Condor MDR11 Pressure Switch, 135/175 PSI, 4-Port, 1/4" Female NPT #0E3AE0
  • Condor MDR11 Pressure Switch, 135/175 PSI, 4-Port, 1/4" Female NPT #0E3AE0
Price: $36.92

Description

Old Part Numbers: CW207594AV

The Condor 11QCXF OEM pressure switch replacement is an MDR11 style, 4-port, 1/4" female NPT pressure switch with manual on/off switch and 90-degree quick-connect style unloader valve and is preset to 135/175 PSI.

Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI), if the unit doesn't turn on or off, or if there is an obvious air leak from the contacts or manifold.

If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, don't replace this part, replace the in-tank check valve. Most pressure switches have a bleeder valve which has a 1/4" plastic or copper line routing to it.

Specifications

  • OEM Part Number: 11QCXF
  • Pressure Settings: 135/175 PSI
  • Manifold Type: 1/4" female NPT, 4-port
  • Unloader Type: 1/4" 90-degree push-connect (EVWSI)
  • Weight: 0.79 lbs

Extra Details

For wiring and adjustment instructions, click here

Technical Documents

Rated insulation voltage (Ui) = 500 V
Motor switching capacity (AC 3) [Ue=240 V (1~)] / Ue=120 V (1~)] = 4.0 kW
Motor switching capacity (UL 508, CSA 22.2) [Ue=240 V (1~) / Ue=120 V (1~)] = 3.0 HP / 2.0 HP
Electrical life (UL 508, CSA 22.2) [Ue=240 V DC; 2.7 A] = 0.5 HP
Electrical life (AC 3) (cycles) > 1 x 105
Mechanical life (cycles) > 5 x 105
Max. electrical cycles (Cycles/h) = 120
Max. mechanical cycles (Cycles/h) = 600
Rated operational current Ie (EN 60947) [at 240 V AC] = 20 A
Rated operational current Ie (UL/CSA) [at 240 V AC] = 26 A
Bursting strength Pz > 35 bar
Permissible medium temperature (Air) = -5...+80 °C
Permissible medium temperature (Water) = +70 °C
Degree of protection (EN 60529) = IP 44
Conductor cross-section (fine stranded cable 1 x / 2 x) = 2.5 / 2.5 mm²
Conductor cross-section (rigid cable 1 x / 2 x) = 2.5 / 2.5 mm²
View AllClose

0 Reviews

View AllClose