Condor MDR11 Pressure Switch, 95/125 PSI, 4 Port, 90 Unloader, On/Off Lever #0E3ADB
(No reviews yet)
Write a Review
- Shipping:
- Calculated at Checkout
Description
The Condor 11FC2E OEM pressure switch replacement is an MDR11 style, 4-port, 1/4" female NPT pressure switch with manual on/off switch and 90-degree compression-style unloader valve and is preset to 95/125 PSI.
Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI), if the unit doesn't turn on or off, or if there is an obvious air leak from the contacts or manifold.
If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, don't replace this part, replace the in-tank check valve. Most pressure switches have a bleeder valve which has a 1/4" plastic or copper line routing to it.
Specifications
- OEM Part Number: 11FC2E
- Pressure Settings: 95/125 PSI (6.5/8.5 BAR)
- Manifold Type: 1/4" female NPT, 4-port
- Auto/Off Function: Yes
- Unloader Type: 1/4" 90-degree compression (EVWI)
- Weight: 0.79 lbs
Technical Documents
| Rated insulation voltage (Ui) | = 500 V |
| Motor switching capacity (AC 3) [Ue=240 V (1~)] / Ue=120 V (1~)] | = 4.0 kW |
| Motor switching capacity (UL 508, CSA 22.2) [Ue=240 V (1~) / Ue=120 V (1~)] | = 3.0 HP / 2.0 HP |
| Electrical life (UL 508, CSA 22.2) [Ue=240 V DC; 2.7 A] | = 0.5 HP |
| Electrical life (AC 3) (cycles) | > 1 x 105 |
| Mechanical life (cycles) | > 5 x 105 |
| Max. electrical cycles (Cycles/h) | = 120 |
| Max. mechanical cycles (Cycles/h) | = 600 |
| Rated operational current Ie (EN 60947) [at 240 V AC] | = 20 A |
| Rated operational current Ie (UL/CSA) [at 240 V AC] | = 26 A |
| Bursting strength Pz | > 35 bar |
| Permissible medium temperature (Air) | = -5...+80 °C |
| Permissible medium temperature (Water) | = +70 °C |
| Degree of protection (EN 60529) | = IP 44 |
| Conductor cross-section (fine stranded cable 1 x / 2 x) | = 2.5 / 2.5 mm² |
| Conductor cross-section (rigid cable 1 x / 2 x) | = 2.5 / 2.5 mm² |