B5900, Z-D27044, 040-0210, Z-ABP-459 #01A185

Model Numbers: B5900, Z-D27044, 040-0210, Z-ABP-459

This is a Two-Stage B5900 pump used on many stationary units such as Coleman Powermate, Sanborn, Devilbiss, and Porter Cable. The model numbers used are B5900, ABP-459, Z-D27044, and 040-0210. Swap out your expensive Two-Stage pump with this inexpensive steel-sleeved aluminum unit.

Requirement: a 5HP motor with at least a 7/8" shaft for this pump

Note: Pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.

Need oil? Click here for synthetic and synthetic-blend air compressor oil to keep your compressor running like new for years to come.

Specifications

• 18 CFM @ 100 PSI, 16 CFM @ 175 PSI
• 1/2" FPT outlet
• Bolt pattern: 6.75 in. front-to-back, 7.5 in. side-to-side
• 13.75 in. single-belt flywheel
• 1-1/4" FPT on aftercooler outlet
• Total height: 16"
• Min RPM: 700, Max RPM: 1400
• Oil capacity: 55 oz. (1.72 qts.)

Extra Details

TORQUE SPECS:   INCH - POUNDS

• Head Bolts: 260-370 IN/LBS
• Intercooler Bolts: 165-240 IN/LBS
• Cylinder Bolt: 260-370 IN/LBS
• Bearing Cover Bolt: 80-100 IN/LBS
• Oilpan Bolt: 80-115 IN/LBS
• Conrod Bolt: 185-270 IN/LBS
• Air Filter Assembly Bolt: 165-205 IN/LBS
• Flywheel Bolt: 260-370 IN/LBS

Extras

Standard Break-In Procedure:
1. Open drain tap.
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.

Video