Safety Valve 140 PSI #01A47C

2" Pressure Gauge [96006] #01A48E

Manifold #01A4F4

NOTE: Not for older 10020-series models that have hoses coming off of the manifold!

Air Inflow Valve Plate [MP2024] #01A4DA

[90394] 1/4" QUICK CONNECT #01A47E

[90235] Wheel Shoulder Bolt #01A474

Air Filter, 2HP Units #01A476

NOTE! This Filter will only fit 2HP models! Order part number 90227 for 1HP models.Extra DetailsA clean air filter is essential to the performance of an air compressor. Keep extras on hand as you will inevitably replace it, sometimes often (if used in a...

[280881] Wheel #01A492

BALL DRAIN VALVE #01A478

Replace if rusted or leaking. Drain your tank regularly to save from replacing it.

Gassing Exhaust Valve [MP2022] #01A4D6

If you have a loss of compression, replace this Exhaust Valve and the Intake Valve.

2HP Cylinder O-Ring Head Rubber Gasket [MP2014-O] #01A7D2

NOTE! For newer models with motor serial# ending in "-OT".

Easy Start Valve #01A4EA

Nut [SYQ53-6310] #01A4DE

Check Valve #01A490

If your unit has a hard time restarting when trying to cycle, order this. If your pressure switch is leaking out of the small bleeder valve on the side (or located underneath), order this valve.

Air Filter Hose #01A486

"T" Connection Valve for Easy Start Valve #01A4EC

Exhaust Hose #01A482

Exhaust Hose for 2HP models!

2HP PISTON RING [MP2009-O] #01A7C5

NOTE! For newer models with motor serial# ending in "-O". This tends to be a high wear part, especially if you are in a high particulate environment. Also, order the two wear together.

Pressure Switch, Condor, 110/130 PSI #01A496

Old Part Numbers: 11AC2FASZPressure Switch Assy. If the compressor doesn't cut in or cut out at the designated PSI, most likely the pressure switch is defective.