NOTE! This will NOT fit the model 4610-H. Don't forget the 283321-GA screws for the manifold!

If your unit has a hard time restarting when trying to cycle, order this. If your pressure switch is leaking out of the small bleeder valve on the side (or underneath), order this valve. NOTE: This...

1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

NOTE! This Filter will only fit 1HP models.  Order part number 90260 for 2HP models - Click here for SKU 90260 Replace periodically to ensure smooth operation of your air compressor.

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

1/4" Quick Connect for California Air Tools air compressors.

California Air Tools cushion foot

Exhaust Manifold Elbow for California Air Tools air compressors.

O-ring Seal (Gasket) on top of the Valve Plate. Usually replaced when the Cylinder O-ring is replaced or if replacing the Valves.

Old Part Numbers: DY10U1 HP Obturating Ring. This is the O-ring Seal that installs on top of the cylinder cup (bottom of the valve plate).

Piston Ring [MP1005]. Replace this if your compressor is producing little pressure, or no pressure at all. For 1 HP units.

Bare Head for the California Air Tool pump. Replace if damaged or leaking. Don't forget to order the Head O-ring Gasket.

Intake (Inflow) Valve for California Air Tools pumps. This is the valve on the bottom of the valve plate. If air leaks out of the intake filter or if the compressor just isn't performing like it...

Bolt for Cushion Foot.

Gassing (exhaust) valve for California Air Tools pumps. This is the valve on top of the valve plate. If air leaks out of the intake filter or if the compressor just isn't performing like it should,...

Old Part Numbers: Shock Strut-CAT1 HP Shock Strut

Bare Valve Plate for California Air Tools 1 HP pumps. Replaced if damaged or warped.

Cylinder Cup for 1 HP pumps. Replace when replacing the Piston (Compression) Ring.

Power Cord with Plug for California Air Tools air compressors, 110V.

80mf for all 1 HP motors. Please note: Capacitors can not be returned for a refund unless proven to be defective.

For 1HP Fan

1 HP Plate Pinch

For 1 HP Units

Gray capacitor housing for your California Air Tools compressor.