NOTE! This Filter will only fit 2HP models! Order part number 90227 for 1HP models. Click here for SKU 90227.Extra DetailsA clean air filter is essential to the performance of an air compress

Old Part Numbers: DY6U2 HP Piston ring for air compressors. This tends to be a high wear part, especially if you are in a high particulate environment. Order the cylinder sleeve when buying this part...

If your unit has a hard time restarting when trying to cycle, order this. If your pressure switch is leaking out of the small bleeder valve on the side (or located underneath), order this valve...

California Air Tools Regulator Manifold for air compressors. The regulator controls the amount of air in your air compressor hose. Replace this if you're not able to adjust the PSI to your hose or if...

1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Also known as a "cold start" valve, this integral component releases air off of the piston and pump head after it shuts off, which allows the motor to start much more easily and efficiently. This...

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 90393Air compressor pressure switch assembly. If the compressor doesn't cut in or cut out at the designated PSI, most likely the pressure switch is defective. NOTE: If your pressure...

California Air Tools air compressor exhaust hose for 2HP models. Stainless steel braded fluid hose, 3/8" ID.

"T" fitting for the cold start valve. This valve installs into the pump head. The braided discharge tube threads into one end and the cold start valve is installed in the other.

Old Part Numbers: SP-90407Complete replacement air compressor motor / pump assembly. Comes with: (1) capacitor, (2) air filters, and (4) shock struts. Oil-Free Pump = cleaner air for better tool...

1/4" Quick Connect for California Air Tools air compressors.

California Air Tools cushion foot

Cylinder o-ring gasket for air compressor pump. Replace if leaking or if you replace the head and/or valve plate.

Exhaust Manifold Elbow for California Air Tools air compressors.

California Air Tools MP2012 cylinder for air compressor repairs.  Replace the cylinder if it is damaged or worn, or if you are also replacing the compression ring.

Rubber O-Ring Gasket for the cylinder head. Replace this gasket if you have to remove the cylinder head.

Old Part Numbers: MP218-O, MP2018-OThis is the o-ring seal for each end of the pump connecting hoses, which connects the two air compressor pump heads.

OEM replacement Pressure Gauge 2.0″ Face, 1/4" NPT Center Back-Mount, 0-180 PSI.

Pressure Plate Screw for 2 HP units. This is the screw that fastens the top cover to the piston rod.

6" White Wheel. Air Compressor Wheel Replacement. NOTE! When ordering the wheel you will also need to order the associated hardware: 90235, Bolt (qty. 1) 91

This is the nylon hose in the intake port of the air intake filter.

Bare Pump Head. Both cylinders use the same pump head. NOTE: Does not include any gaskets/seals, order separately.

35 MFD, For all 220V units. Please note: Capacitors can not be returned for a refund unless proven to be defective.

Steel Plug for the pump head.

2HP Shock Strut

2 HP Pressure Plate (Piston Rod Cover). Replace if damaged or warped.

Old Part Numbers: Left Fan-CAT

SR-7K-2 Black Strain Relief

Power Cord with Plug for California Air Tools air compressors, 110V.

Protect your fingers by keeping the spinning fan covered with this fan cover.

The California Air Tools automatic drain valve long extension kit (110V / 60Hz) is designed to eliminate the need to manually drain water and condensate from the air compressor air tank. This kit...

Screw that holds on the fan cover to the pump. 2HP Fan Cover Screw

2HP Adjustment Stent