RCP-1030G #01B041
Loading Schematic
Model Numbers: RCP-1030G
Repair Parts for the Chicago Pneumatic model RCP-1030G Portable Two-Stage Gas Air Compressor
Specifications
- Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
- 18cfm @100psi 16cfm @175psi.
- 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
- 13.75 in. single belt flywheel.
- 1-1/4" FPT on aftercooler outlet.
- Total ht. 16" Min RPM 700 Max RPM 1400
- New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Extra Details
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
Extras
We have your Chicago Pneumatic RCP-1030G parts here. Whether you need a pressure switch, check valve or a whole new pump, we have your parts. Don't forget the rubber isolator pads for floor mounting. Chicago Pneumatic RCP-1030G parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Chicago Pneumatic RCP-1030G parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need. Make sure to keep spare parts on hand so that your down time will be minimal. Oil and air filters should be replaced every 3 to 4 months if used frequently, twice a year if not. Even if you're not using your compressor, drain your tank regularly to prevent rust.
Technical Documents
B5900 Pump Torque specs:
- Head Bolts: 260-370 IN/LBS
- Intercooler Bolts: 165-240 IN/LBS
- Cylinder Bolt: 260-370 IN/LBS
- Bearing Cover Bolt: 80-100 IN/LBS
- Oilpan Bolt: 80-115 IN/LBS
- Conrod Bolt: 185-270 IN/LBS
- Air Filter Assembly Bolt: 165-205 IN/LBS
- Flywheel Bolt: 260-370 IN/LBS
-
B5900/B6000 Air Filter / Synthetic Blend Air Compressor Oil Maintenance Kit #116637
Price: $34.04This handy maintenance kit includes a B5000/B5900/B6000 air filter element and one (1) quart of high-quality synthetic blend lubricant to keep your air compressor running like a champ! Replace the air filter every 3-4 months if the air compressor is used...Price: $34.04 -
B5900/B6000 Air Filter / Synthetic Air Compressor Oil Maintenance Kit #116638
Price: $36.93This handy maintenance kit includes one air filter element for the B5000/B5900/B6000 air compressor and one (1) quart of high-quality fully synthetic lubricant to keep your air compressor running like a champ! Replace the air filter every 3-4 months if...Price: $36.93 -
Valve Plate Assembly, B5900 Pump #11645A
Price: $97.35Old Part Numbers: 5940051Valve plate assembly for B5900 air compressor pumps. Replace this valve plate assembly to restore compression (ABAC). NOTE: Does not include gaskets. To complete your repair also order the Head Gasket Kit or the complete Gasket...Price: $97.35 -
Bolt, M10 x 55mm #05C1B7
Price: $9.84Old Part Numbers: 059-0231Air compressor head bolt, M10 x 55mm.Price: $9.84 -
Price: $1,605.06
-
Pressure Gauge, 2" Face, 300 PSI, 1/4" MPT Back-Mount #116279
Price: $8.76Old Part Numbers: PG0250300BK, S1151Air compressor pressure gauge, 1/4" male NPT back-mount, 300 PSI, 2" face. Remember to apply plumber's tape to the threads.Price: $8.76 -
V-Belt, 4L630, A61 #0E54CF
Price: $15.62Old Part Numbers: 1312100137Air compressor v-belt. Replace if frayed or slipping.Specifications 4L630 (A61) 1/2" wide 63" circumference 0.285 Belt DepthPrice: $15.62 -
Head Gasket Kit B5900 #05BF5A
Price: $165.89Four gaskets needed for valve plate and head gaskets. Note: Two-piece valve plate style only. No returns or refunds.Price: $165.89