RCP-930G #01B046
Loading Schematic
Model Numbers: RCP-930G
Repair Parts for the Chicago Pneumatic model RCP-930G Portable Two-Stage Gas Air Compressor
Specifications
- Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
- 18cfm @100psi 16cfm @175psi.
- 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
- 13.75 in. single belt flywheel.
- 1-1/4" FPT on aftercooler outlet.
- Total ht. 16" Min RPM 700 Max RPM 1400
- New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Extra Details
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
Extras
We have your Chicago Pneumatic RCP-930G parts here. Whether you need a pilot valve, throttle control or a whole new pump, we have your parts. Don't forget the rubber isolator pads for floor mounting. Chicago Pneumatic RCP-930G parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Chicago Pneumatic RCP-930G parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need. Make sure to keep spare parts on hand so that your down time will be minimal. Oil and air filters should be replaced every 3 to 4 months if used frequently, twice a year if not. Even if you're not using your compressor, drain your tank regularly to prevent rust.
Technical Documents
B5900 Pump Torque specs:
- Head Bolts: 260-370 IN/LBS
- Intercooler Bolts: 165-240 IN/LBS
- Cylinder Bolt: 260-370 IN/LBS
- Bearing Cover Bolt: 80-100 IN/LBS
- Oilpan Bolt: 80-115 IN/LBS
- Conrod Bolt: 185-270 IN/LBS
- Air Filter Assembly Bolt: 165-205 IN/LBS
- Flywheel Bolt: 260-370 IN/LBS
-
Price: $165.58
-
Aftercooler, B5900 #048BD8
Price: $137.44Old Part Numbers: 5070101-NU, 2236102167Aftercooler, HP51 pump, Collett Lavor B5/6/7000 NPT.Price: $137.44 -
Pilot Unloader Check Valve, Cut-In/Cut-Out PSI is 145/175 #11631D
Price: $99.95Old Part Numbers: NG-6394, NG-20-M-SU4-SST, 6394, NG-20-M-SU4-SST / 145-175NG-20 pilot unloader check valve for air compressors. Cut-In/Cut-Out PSI = 145/175Price: $99.95 -
Bare Head, B5900 Pump #04A65B
Price: $182.09Bare head for B5900 air compressor pump. Order head gasket separately.Price: $182.09 -
B5000 / B5900 Air Compressor Pump Ring Kit, High-Pressure (HP) #04A625
Price: $96.25Includes all four (4) rings for the smaller, high-pressure (HP) piston (hone the cylinders before installation). For the B5000 and B5900 model air compressor pumps. If you have a sudden loss of performance or if the pump is using too much oil, replacing...Price: $96.25 -
Aftercooler Gasket #048B0C
Price: $8.52Air compressor aftercooler gasket. Also available in the complete Gasket Kit. Note: This gasket fits multiple pumps. Confirm the gasket kit you need is for the HP51 or the B6000 air compressor pumps.Price: $8.52 -
Intercooler Safety Valve, 1/4", 65 PSI #048B1A
Now: $15.95Was: $16.60Old Part Numbers: 2901324963Air compressor intercooler safety valve. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.Specifications 1/4" male NPT 65 PSI DeVilbiss and Craftsman air compressor...Now: $15.95Was: $16.60 -
Ball Valve, 3/4" FPT Inlet / Outlet #048C54
Price: $33.503/4" FPT x 3/4" MPT ball valve for air compressors.Price: $33.50