RCP-930G #01B046
Loading Schematic
Model Numbers: RCP-930G
Repair Parts for the Chicago Pneumatic model RCP-930G Portable Two-Stage Gas Air Compressor
Specifications
- Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
- 18cfm @100psi 16cfm @175psi.
- 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
- 13.75 in. single belt flywheel.
- 1-1/4" FPT on aftercooler outlet.
- Total ht. 16" Min RPM 700 Max RPM 1400
- New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Extra Details
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
Extras
We have your Chicago Pneumatic RCP-930G parts here. Whether you need a pilot valve, throttle control or a whole new pump, we have your parts. Don't forget the rubber isolator pads for floor mounting. Chicago Pneumatic RCP-930G parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Chicago Pneumatic RCP-930G parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need. Make sure to keep spare parts on hand so that your down time will be minimal. Oil and air filters should be replaced every 3 to 4 months if used frequently, twice a year if not. Even if you're not using your compressor, drain your tank regularly to prevent rust.
Technical Documents
B5900 Pump Torque specs:
- Head Bolts: 260-370 IN/LBS
- Intercooler Bolts: 165-240 IN/LBS
- Cylinder Bolt: 260-370 IN/LBS
- Bearing Cover Bolt: 80-100 IN/LBS
- Oilpan Bolt: 80-115 IN/LBS
- Conrod Bolt: 185-270 IN/LBS
- Air Filter Assembly Bolt: 165-205 IN/LBS
- Flywheel Bolt: 260-370 IN/LBS
-
Oil Seal, B5900 Pump #05C1AD
Price: $9.30Old Part Numbers: 046-0137Oil seal for the crankshaft (flywheel side) of the B5900 air compressor pump.Price: $9.30 -
Air Filter Element, B5900 / B6000 Pumps #05C807
Price: $18.95Old Part Numbers: 8973035122Protect your air compressor pump from damage by keeping clean or replacing it. Fits B5900/B6000 pumps. Filter element only.Price: $18.95 -
Intercooler Gasket, B5900 Pump #05C17D
Price: $8.13Intercooler gasket for the B5900 air compressor pump. Also available in the B5900Head Gaskets or 53N0056 Gasket Kit. We recommend ordering the gasket kit, as it will save you money and will ensure that you have all of the head gaskets. We always...Price: $8.13 -
Price: $0.54
-
Oil Breather, B5900 Pump #05C819
Price: $12.95Oil breather assembly for the B5900 air compressor pump.Price: $12.95 -
B5900 Pump HP Running Gear Kit #05C3B0
Price: $150.26Old Part Numbers: ABP-8226502This air compressor running gear kit includes the piston, connecting rod, ring kit, and c-clips for High-Pressure (small cylinder) side only. Don't forget to install new gaskets as well.Price: $150.26 -
Aftercooler Bolt, 10mm, B5900 / HP51 Pumps #05C1B3
Price: $2.6410mm steel aftercooler bolt for B5900/HP51 air compressor pumps.Price: $2.64 -
Base Gasket, B5900 Pump #05C195
Price: $10.89Gasket for bottom oil pan of air compressor pump. If the compressor pump doesn't seem to pressurize as quickly as it should or is leaking in between the head, valve plate, cylinder, or crankcase while running, there's a good chance you need to install...Price: $10.89