B09J500-20, B09JL500-20A #01AF7D
Loading Schematic
Model Numbers: B09J500-20, B09JL500-20A
Repair Parts for the Coleman Sanborn models B09J500-20, B09JL500-20A Portable Oil-Free Air Compressors
This pump was used on over 100 models (many have 048-0088 on connecting rod for piston). This is a twin-head pump and uses two of the same pistons/connecting rods.
Specifications
Too much to repair? Click here to purchase a new comparable unit!
Extra Details
- When replacing the 048-0074M piston/cylinder kit, do not push the piston in the cylinder from below or this will damage the piston ring and void your warranty. ALWAYS pull the connected rod down through the cylinder until it is 1/2 way down the cylinder, then slide the connecting rod down through the aluminum housing and turn crank until the rod will slide over the bearing.
- Tighten the connecting rod to the crank to approx. 40-50 in lbs. DO NOT OVER TIGHTEN!
- If your eccentric/crankshaft has any wear and your new piston/cylinder kit is not tight on the eccentric/crankshaft, a small amount of your new connecting rod ID may need to be removed. To do this, simply remove the retaining screw of the connecting rod, insert the connecting rod in a vise and take a hacksaw and make a cut where the connecting rod joins together (below the screw you just removed), just one hacksaw blade width. This will allow you to tighten your screw up a little more on the eccentric/crankshaft.
- Make sure to keep the air filter (002) clean. Grit will destroy your new piston and cylinder!
Manuals
Click here to order and download the Owner's Manual
Extras
We have Coleman Sanborn B09J500-20, B09JL500-20A parts here. Whether you need a pressure switch, piston kit or a regulator, we have your parts. Coleman Sanborn B09J500-20, B09JL500-20A parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman Sanborn B09J500-20, B09JL500-20A parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. If compression is low it's probably due to a damaged Piston/Compression Ring or damaged Reed Valves in the Pump. This is a very old model and unfortunately many OEM parts are now obsolete.
-
Compression Nut & Sleeve, 3/8" #11623A
Price: $1.53Old Part Numbers: 058-00073/8" OD compression nut and sleeve (ferrule) for the air compressor transfer tube.Price: $1.53 -
Hubbell Pressure Switch, 90/120 psi #0E3D70
Price: $90.10Old Part Numbers: 034-0094For F Series Oil Free Compressors that have 4 port pressure switch attached to the manifold with a pipe nipple. Cut in 90psi Cut out 120 psi. Switch used on: B09j500/bl154s/bc15c040/07fc/04fc/124/125 (was 034-0026 or 034-0084).Price: $90.10 -
Check Valve, 3/8" Compression x 1/2" MPT #0E5372
Price: $8.95Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port. The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time restarting when trying to cycle or your pressure switch...Price: $8.95 -
Brass Wingnut Drain Cock, 1/4" #0186A5
Price: $10.771/4" NPT drain cock. Prevent rust from ruining your air compressor tank by draining your tank daily. Keep an extra around for a spare.Extra DetailsThis was a new check valve installed less than a year ago. Due to the tanks not being drained, this check...Price: $10.77