L5006016, L6506016, L7006016, XL5006016 #01B098
Loading Schematic
Model Numbers: L5006016, L6506016, L7006016, XL5006016
Repair Parts for the Coleman Powermate L5006016, L6506016, L7006016 XL5006016 Stationary Single-Stage Electric Air Compressors
This unit uses the "165" model Pump (5 HP and up)
Specifications
165 Pump specs:
- Min RPM 700
- Max RPM 1200
- Max pressure 125 psi
- Max duty cycle 50%
- Oil capacity 18 oz.
- 130 Pump 6.0 cfm @ 90psi (2 HP motor)
- 165 Pump 10.1 cfm @ 90spi (5 HP motor)
- 39 lbs.
- Torque specs (see Schematic on "Description" tab)
- For 2-4.5HP units, you have a 130 pump
- For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
- Make sure of your pump model before ordering these parts or a new pump.
- New pump comes with felt style air filter. Old canister style not available with new pumps.
- New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
- If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.
Extra Details
Â
NOTE! If you are replacing the Pressure Switch, the new Switch has a "quick-connect" Unloader Valve and it will not accept the original aluminum Bleeder Tube, you must order the Nylon Tube Kit 18 also.
Â
Manuals
Click here to order and download the Owner's Manual for the L6006016, L6506016, L6006016 model Air Compressors
Click here to order and download the Owner's Manual for the L5006016 and L7006016 model Air Compressors
Technical Documents
Pump torque specs:
- Head bolt torque 220-200 in lbs.
- Carrier bolt torque 170-230 in lbs.
- Flywheel bolt torque 150-250 in lbs.
- Bottom oil pan torque 30-50 in lbs.
- Connecting rod torque 160-200 in lbs.
Video
This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.
Â
-
Cylinder Gasket #0592D8
Price: $23.44Also available in the 130/165VPGASKETS kit. We recommend ordering the gasket kit, as it will save you money and will ensure that you have all of the head gaskets. We always recommend replacing all head gaskets at the same time, as the other gaskets will...Price: $23.44 -
Price: $25.78
-
Price: $59.19
-
Price: $67.80
-
Price: $27.90
-
Check Valve, 3/8" Compression x 1/2" MPT w/ 1/8" Hole and Plug #0594FD
Price: $26.50Old Part Numbers: 031-00723/8" compression inlet x 1/2" male NPT outlet check valve with 1/8" hole and plug. If the small unloader (bleeder) valve on or under your pressure switch leaks constantly AFTER the unit shuts off, replace this part. The check...Price: $26.50 -
Price: $27.90
-
Adapter #058ECC
Price: $22.29If your pump has an 'X' in front of the serial number and your supply tube measures 1/2" OD, then order this 1/4" NPT x 1/2" Compression adaptor.Price: $22.29 -
Connecting Rod for 5 Hp And Up. #058D4D
Price: $37.37Connecting Rod for 5 HP and greater for 165 pump. Torque 160-200 in. lbs.Price: $37.37 -
Air Filter Element #058D5B
Price: $64.10#8 hollow filter for older Sanborn pumps (old wing nut style)(ea.) 2.25" Width & 2.25" Height Protect your pump from damage by keeping clean or replacing.Price: $64.10 -
Price: $27.84
-
Now: $9.95Was: $18.27