B51-AT24-80V, B51-A24-80V1, H580, C05Z0... #01AFD5
Loading Schematic
Model Numbers: B51-AT24-80V, B51-A24-80V1, H580, C05Z080H2A154
Repair Parts for the Coleman Sanborn models B51-AT24-80V, B51-A24-80V1, H580, C05Z080H2A154 Stationary Two-Stage Oil-Bath Electric Air Compressors
Â
Specifications
B5900 Pump specs:
- Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
- Swap out your expensive 2 stage pump with this inexpensive steel sleeved aluminum unit.
- 18cfm @100psi 16cfm @175psi.
- 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
- 13.75 in. single belt flywheel.
- 1-1/4" FPT on aftercooler outlet.
- Total ht. 16" Min RPM 700 Max RPM 1400 New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Extra Details
B5900 Pump Torque specs:
- Head Bolts: 260-370 IN/LBS
- Intercooler Bolts: 165-240 IN/LBS
- Air Filter Assembly Bolt: 165-205 IN/LBS
- Flywheel Bolt: 260-370 IN/LBS
Manuals
Click here to order and download the Owner's Manual
Extras
We have Coleman Sanborn B51-AT24-80V, B51-A24-80V1, H580, C05Z080H2A154 parts here. Whether you need a pressure switch or a new pump, we have your parts. Coleman Sanborn B51-AT24-80V, B51-A24-80V1, H580, C05Z080H2A154 parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman Sanborn B51-AT24-80V, B51-A24-80V1, H580, C05Z080H2A154 parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates.
Technical Documents
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
-
Copper Tubing, 1/4" OD #057D09
Price: $9.601/4" OD copper tubing. Sold by the foot (example: order qty 2 for 2 feet).Price: $9.60 -
Price: $9.84
-
1/4" Compression Nut & Sleeve #1163D2
Price: $1.08Old Part Numbers: 60-4-61-4, 058-0017-MAT1/4" compression nut and sleeve. Order two, one for each end of the tube.Price: $1.08 -
1/4" Compression Nut & Sleeve #116340
Price: $1.41Old Part Numbers: 60-4-61-41/4" compression nut and sleeve. Order two, one for each end of the tube.Price: $1.41 -
Air Compressor Pressure Switch / Manifold Hex Head Pipe Plug, 1/4-18 NPT #0E52D4
Price: $2.45Old Part Numbers: 3168Air compressor pressure switch/manifold pipe plug, 1/4-18 male NPT.Price: $2.45 -
On Sale
1/4" HD Wingnut Drain Cock #07F8E3
Now: $17.95Was: $19.531/4" NPT Heavy Duty drain cock. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare.Now: $17.95Was: $19.53 -
On Sale
Pressure Gauge, 300 PSI, 1/4" MPT, Bottom-Mount #080624
Now: $10.95Was: $13.50Old Part Numbers: PG0250300BTBottom-mount, 1/4" MPT, 300 PSI air compressor pressure gauge.Specifications NPT: 1/4" Dial / Face: 2" PSI: 300 PSI Bottom-MountNow: $10.95Was: $13.50 -
Pulley, 5.75" OD, Two-Groove #080B62
Price: $80.475.75" OD 2-belt air compressor pulley. Make sure to also order the required QD-H-7/8 bushing.Price: $80.47