C05Z080V2A154 #01AFD6
Loading Schematic
Model Numbers: C05Z080V2A154
Repair Parts for the Coleman Powermate model C05Z080V2A154 Stationary Two-Stage Electric Air Compressor
Specifications
B5900 Pump specs:
- Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
- Swap out your expensive 2 stage pump with this inexpensive steel sleeved aluminum unit.
- 18cfm @100psi 16cfm @175psi.
- 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
- 13.75 in. single belt flywheel.
- 1-1/4" FPT on aftercooler outlet.
- Total ht. 16" Min RPM 700 Max RPM 1400 New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Extra Details
B5900 Torque specs: INCH/POUNDS
- Head Bolts: 260-370 IN/LBS
- Intercooler Bolts: 165-240 IN/LBS
- Air Filter Assembly Bolt: 165-205 IN/LBS
- Flywheel Bolt: 260-370 IN/LBS
Manuals
Click here to order and download the Owner's Manual
Extras
We have your Coleman Powermate C05Z080V2A154 parts here. Whether you need a pressure switch, air filter, valve plate assembly or a new pump, we have your parts. Coleman Powermate C05Z080V2A154 parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman C05Z080V2A154 parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates.
Technical Documents
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
-
Price: $37.08
-
Price: $7.44
-
Price: $21.54
-
Head Gasket Kit B5900 #05BF5A
Price: $162.79Four gaskets needed for valve plate and head gaskets. Note: Two-piece valve plate style only. No returns or refunds.Price: $162.79 -
B5900 Valve Plate Assembly #05BF4E
Price: $194.80B5900/B5000 Valve Plate Assembly. Item comes in 2 separate packages. B5000 and B5900 pump now use the same valve plate. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem. Note: This assembly is...Price: $194.80 -
B5900 Aftercooler kit #116285
Price: $55.54MADE TO ORDER. This kit allows you to remove the aftercooler that comes with the new B5900 pump and install this adapter kit. Simply remove the aftercooler, clean off the gasket material, install the gasket, adapter plate, washers and bolts and you...Price: $55.54 -
Male Compression Elbow, 1/4" Compression x 1/8" MPT #0577E7
Now: $10.95Was: $14.461/4" compression x 1/8" male NPT air compressor compression elbow. Note: For COPPER tubing. If you are using nylon or plastic tubing, consider using our T1059.Now: $10.95Was: $14.46 -
090-120 PSI Furnas Hubbell Pressure Switch #048A8B
Price: $80.30Old Part Numbers: 034-0097OEM Switch. 1 port; 90-120 PSI, unloader and on/off lever. If your valve is leaking on the side of the switch do not order this part. Order check valve instead. SpecificationsPrice: $80.30