S11G-A24-50H, 11Z050H2AB, C11Z050H2AB00 #01AFDB
Loading Schematic
Model Numbers: S11G-A24-50H, 11Z050H2AB, C11Z050H2AB00
Repair Parts for the Coleman Sanborn models S11G-A24-50H, 11Z050H2AB, C11Z050H2AB00 Stationary Two-Stage Gas-Powered Air Compressors
B5900 aluminum pump on 50 gallon horizontal tank, gas-driven.
Specifications
B5900 Pump specs:
- Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
- Swap out your expensive 2 stage pump with this inexpensive steel sleeved aluminum unit.
- 18cfm @100psi 16cfm @175psi.
- 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
- 13.75 in. single belt flywheel.
- 1-1/4" FPT on aftercooler outlet.
- Total ht. 16" Min RPM 700 Max RPM 1400 New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Extra Details
B5900 Pump Torque specs:
- Head Bolts: 260-370 IN/LBS
- Intercooler Bolts: 165-240 IN/LBS
- Cylinder Bolt: 260-370 IN/LBS
- Bearing Cover Bolt: 80-100 IN/LBS
- Oilpan Bolt: 80-115 IN/LBS
- Conrod Bolt: 185-270 IN/LBS
- Air Filter Assembly Bolt: 165-205 IN/LBS
- Flywheel Bolt: 260-370 IN/LBS
Extras
We have Coleman Sanborn S11G-A24-50H, 11Z050H2AB, C11Z050H2AB00 parts here. Whether you need a pilot valve or a new pump, we have your parts. Coleman Sanborn S11G-A24-50H, 11Z050H2AB, C11Z050H2AB00 parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman Sanborn S11G-A24-50H, 11Z050H2AB, C11Z050H2AB00 parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates.
Technical Documents
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
Video
-
Price: $61.09
-
Price: $33.82
-
Head Gasket Kit B5900 #05BF5A
Price: $165.89Four gaskets needed for valve plate and head gaskets. Note: Two-piece valve plate style only. No returns or refunds.Price: $165.89 -
Compression Nut & Sleeve, 3/4" #11623B
Price: $7.20Old Part Numbers: ST072321AV, 058-00123/4" compression nut & sleeve (2 required). For air compressor units made before 05/20/1994.Price: $7.20 -
B5900 Valve Plate Assembly #05BF4E
Price: $198.55B5900/B5000 Valve Plate Assembly. Item comes in 2 separate packages. B5000 and B5900 pump now use the same valve plate. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem. Note: This assembly is...Price: $198.55 -
B5900 Aftercooler kit #116285
Price: $55.72MADE TO ORDER. This kit allows you to remove the aftercooler that comes with the new B5900 pump and install this adapter kit. Simply remove the aftercooler, clean off the gasket material, install the gasket, adapter plate, washers and bolts and you...Price: $55.72 -
Male Compression Elbow, 1/4" Compression x 1/8" MPT #0577E7
Now: $10.95Was: $14.461/4" compression x 1/8" male NPT air compressor compression elbow. Note: For COPPER tubing. If you are using nylon or plastic tubing, consider using our T1059.Now: $10.95Was: $14.46 -
Oil Seal, B5900 Pump #05C1AD
Price: $9.30Old Part Numbers: 046-0137Oil seal for the crankshaft (flywheel side) of the B5900 air compressor pump.Price: $9.30