102.173330 #01B3CA

Complete ring set for Kellogg 325 pump. Stagger ring gaps and hone cylinders.

Gasket Set for Kellogg 325 pump. If the compressor pump doesn't seem to pressurize as quickly as it should or is leaking in between the head, valve plate, cylinder or crankcase while running, there's a good chance you need to install new gaskets. You can...

Old Part Numbers: 31009, CK31009Does not include key. OD – 13.75” (349.25 MM) Shaft – 25-25.5 MM  (+/-) Width – 61.75 MM Keyway – 3 MM (deep) x 4.6 MM (wide) 2-groove  All dimensions are approximate.

Centrifugal unloader valve for Kellogg-Campbell Hausfeld-Saylor Beall air compressor pumps.  Simply remove old valve, install new valve, and adjust. Specifications 1/8" NPT X 5/16" Comp

Old Part Numbers: CK30310Complete metal air filter assembly for air compressors with filter element plus 3 extra filter elements. 1" MPT threaded inlet. Takes the #14-SOL Filter Element. Fits the Kellogg 325, 331, 332, 335, 452 Pumps. Replacing the...

R-321 Kellogg style Delivers 7.4 CFM @ 175 PSI (2HP) For 1-2 HP Motors Large Frame Motors Slow speed (705 RPM) Positive Ring Fed Lubrication Steel rods with automotive type inserts and needle bearings at wrist pins Centrifugal unloading Cast-iron...

Old Part Numbers: 17274, CK17274Kellogg 321/335 air compressor pump oil feeder ring. This important component feeds oil to the shaft bearings. Replace if the pump is bogging down or squealing to ensure proper lubrication. Need oil? Click...

Old Part Numbers: K4015, 38274Connecting rod insert bearings for the Kellogg 321 air compressor pump. Includes one (1) pair of inserts.

Old Part Numbers: CK48870, 48870

Old Part Numbers: CK38270LP (large cylinder) connecting rod assy w/ needle bearing and inserts.