921.16475, WPB1982513 #01B063

921.16475, WPB1982513 #01B063

Loading Schematic

Model Numbers: 921.16475, WPB1982513

Repair Parts for the Craftsman model 921.16475, WPB1982513 Portable Single-Stage Oil-Bath Electric Air Compressor

NOTE! This unit uses the "130" model pump.

If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.

Specifications

Pump specs:

  • Min RPM 700
  • Max RPM 1200
  • Max pressure 125 psi
  • Max duty cycle 50%
  • Oil capacity 18 oz.
  • 130 Pump 6.0 cfm @ 90psi (2 HP motor)
  • 165 Pump 10.1 cfm @ 90spi (5 HP motor)
  • 39 lbs.
  • Torque specs (see Schematic on "Description" tab)
  • For 2-4.5 HP units, you have a 130 pump
  • For 5 HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
  • Make sure of your pump model before ordering these parts or a new pump.
  • New pump comes with felt style air filter. Old canister style not available with new pumps.
  • New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
  • If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.

Technical Documents

  • Head bolt torque 220-200 in lbs.
  • Carrier bolt torque 170-230 in lbs.
  • Flywheel bolt torque 150-250 in lbs.
  • Bottom oil pan torque 30-50 in lbs.
  • Connecting rod torque 160-200 in lbs.

Video

This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.

 

There are no products listed under this category.