Old Part Numbers: E10818512" OD Flywheel for the 130/165, 753H/755H, 040-0352, 040-0354, 040-0429, and 040-0430 model air compressor pumps. NOTE: The old pump used a 10" OD flywheel, which is now obsolete. If you have the older, smaller flywheel, you...

Head Gasket only. We always recommend replacing all head gaskets at the same time, as the other gaskets can be compromised once the head is removed. Note: We recommend you replace the Cylinder Gasket or the Gasket Kit when replacing your air compressor's...

Old Part Numbers: SRV250175, 1229O-175Air compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.Specifications MPT Inlet: 1/4 in. FPT Outlet: 3/8...

Old Part Numbers: 5140119-60, EV1WSIPressure switch unloader valve for Craftsman/Powermate air compressors. When the air compressor reaches the maximum air pressure, this valve bleeder releases the air.Specifications 90 Degree  Twist Lock Mounting...

Old Part Numbers: PG0250300BTBottom-mount, 1/4" MPT, 300 PSI air compressor pressure gauge.Specifications NPT: 1/4" Dial / Face: 2" PSI: 300 PSI Bottom-Mount 

Head Gasket only. Replace if you remove the head, if leaking, or you have a loss of compression. Recommended to replace the cylinder gasket as well.

Valve plate assembly (includes gaskets). Two valves are located in the head and two valves located in the valve plate (head not included). If air leaks out of the intake filter or if the compressor just isn't performing like it should, order this kit. A...

Complete gasket kit for 753H / 755H air compressor pumps, including crankshaft seal. Includes: head gasket, valve plate / cylinder gasket, crankcase gasket, bearing cover gaskets, and oil seal. If the compressor pump doesn't seem to pressurize as quickly...