Gasket Kit BIN GASKETS NON #07F8B5

Includes all necessary gaskets for rebuilding pump.

3/4" MPT Air Filter Assembly #0A12A4

Old Part Numbers: FS14075Complete filter assembly including filter element. 3/4" threaded inlet. Takes the #14 Filter Element.

Replacement Filter Element for (#1-4) Filter Assby. #0A12AE

Generic replacement filter element, fits all "FS-14" Assemblies. 4.25"OD x 3"ID x 2 3/8" Height. Replace every 3-4 months if air compressor is used frequently. A dirty filter can cause damage to the pump's valves, clog your check valve and reduce the CFM...

Gasket #07FC9C

This gasket is now metal, which provides better longevity against high temperatures and back pressure.

GAUGE OIL SIGHT K11 K17 K24 K30 #07F8C1

Old Part Numbers: 30500130CHOil Site Gauge. Save old gasket.

Bolt #07FB47

Valve, Reed Hp #07FCB6

High-Pressure Reed Valves (2 needed)

Ring, Compression Hp #07FCB4

HP Compression ring only.

Intercooler Right #07F8CF

Fell over and cracked your intercooler? This is the right side only. Need both? Order the left side as well.

Aftercooler Gasket #07FA4C

Order when replacing or removing aftercooler.

Bolt #07FF61

Plug #07FCD0

Washer #07FCC4

Nipple #07FD50

Cross #07FD52

Bolt #07FC92

Black Plug #07FCCC

Brass Nut #07FC89

SCREW -K24K25K28K30K50K60K100 #0804B2

Low Pressure Piston #07F8BD

Larger low pressure piston. Piston only. No rings.

Black Nipple #07FB55

Shutoff Valve, 3/8-inch #0800FF

Shutoff (Gate) Valve, 3/8" FPT. 

Nut #07FD4E

Valve, Reed HP #07FA03

Low-Pressure Reed Valve (4 needed). Order VP gaskets as well when installing new valves.  

Head #07F8D1

Unit fall and break the head. Make sure to order gasket kit as well.

Pin, Piston LP #07FCB2

Valve Plate Assembly #07FCCE

Includes valve plates, valves, and gaskets. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem.

Gasket #07FC9E

This gasket is now Teflon, which provides better longevity than the original paper gasket.

Belt Guard #07FD30

Old Part Numbers: BG1020, BG1000Custom built to order, 3-4 week lead time. Please include your model number in the comments when ordering these to receive the correct product.

Cylinder #07F8FD

Replace if rusted, pitted or grooved.

Washer #07FD32

Brass Straight Flare Adapter #07FD44

Old Part Numbers: 145DST1/2" Male Flare x 1/2" MPT. Use this with the FDT12 tube and others.

K30 Pump Assy (for Gas Engines, Less Flywheel) #07F894

For gas engine powered units. Less flywheel. Use your old flywheel.Includes air filter assembly. Add oil, bolt on and go! Oil Capacity = 47 oz and is NOT included. Please specify your model number in the comments section of your order when...

Washer #07FCC6

Elbow #07FD36

Nut #07FCC0

Crankshaft K30 #07F8B9

If your crank is grooved, replace it to ensure that your rebuild will not be in vain. If there are only surface deposits of aluminum from the bearings, then remove them with a soft wire brush and then polish your crank.

Ring - LP #07FD6A

RING SCRAPER HP K30 K60 #07FCAE

Pulley #07FD2A

Compression Ring #07FCA8

SCREW K28 K60 K60 #080549

Washer #07FCD4

Brass Elbow #07FB51

Black Cap #07FB59

Bolt #07FD3E

Connecting Rod, K30/K35 #07F8BB

Old Part Numbers: 31101990CHReplace these if bent or worn. Check crank for damage first. Same rod for hi and lo pressure piston (includes upper bushing). Insert Bearings NOT included! Order 3119013017CH Bearing Inserts for this new rod!

Rolair K30 Pump Rebuild Kit (Rings, Valves, Gaskets, Filter, Oil) #08108E

Old Part Numbers: K30REPKIT/10, K30REPKIT/30, K30REPKIT/SYNIncludes most needed parts for full rebuild. Kit contains: gasket set, oil sight glass, oil breather/dipstick, rings, air filter, reed valves, and blended synthetic compressor oil (order 2 pair...

Bearing Carrier #07FF47

Nut #07FB4B

Lock Washer #07FD4C

CRANKCASE BREATHER K50 3/8_INCHES #07F8A9

Old Part Numbers: 36500300CH Crankcase breather with o-ring.