1/2" MPT Air Filter Assembly #0A12A0

Metal Assy, 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock. Uses 06 element.

Belt, 51" Long A49 #0811DD

Old Part Numbers: 4L510

Filter Element, Felt #01A8EE

Ball Bearing #01A8DC

Handle VT VS WL Black #01A964

Old Part Numbers: HL001800BH, VS001000AV

OIL DIPSTICK BREATHER ASSY #01E0B4

SHAFT KEY 3/16 X 1 #01A8C8

Old Part Numbers: PM004904AVFor flywheel.

WHEEL 10 X 2.75 #01AE8E

Old Part Numbers: WA004500AVOrder hubcap also if needed. (10")

3 Port Regulator #01A92E

Old Part Numbers: RE206901AV, RE206200AVAdjustable air pressure knob assembly (gauge sold separately).

EXHAUST TUBE VT 20GAL GAS #05944F

Old Part Numbers: VT045300AP

Cap Screw #01B03E

M8 X 150.

BUSHING ADAPTER 14-18 X 18-27 #01A934

Old Part Numbers: 31551/4" x 1/8" Adapter. If you need a 1/4" MPT fitting, but the part you have is only 1/8" MPT, then use this bushing adapter.

NIPPLE #01A970

Pressure Gauge, Right-Mount, 1.5 IN 300 PSI Gauge 1/8" NPT Low #01A8A6

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV0-300 PSI, 1/8" NPT, Right-mount, 1.625" FACE

TUBE FITTING #01AC3E

Note: order this item for models VT615208, VT617205, VT617206, EX800300 & VT630900 only.

New Pump with Flywheel #01AFAF

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBHas a 38mm stroke. Used on 120V Electric units. Note: New style pump has only one airline coming off of the pump head. Order the CTD1238ADAPTKIT if your old pump...

New Pump with Flywheel #01AAE1

Old Part Numbers: VT470401KB, VT472200AJ, VT490000AV, VT471400AJ, VT232605KB, VT470000KB, VT490000SJ, VT470000AJ, VT4723Has a 55mm stroke. Campbell Hausfeld VT2030, VT4723, VT4923 Twin Cylinder 3.7HP VT Pump. Recommended for 240V and gas units. Same...

NS UNLOADER 110-95 PSI #01AF73

SET SCR 1/4-20 X 3/4 #01A976

Old Part Numbers: ST012200AVThese screws are currently out of stock at the manufacturer and can not be purchased. 

Brace Assembly Long #01ABB1

WASHER PLAIN TYPE A 516N ZINC #01A97E

Old Part Numbers: ST070930AV, AL136000AV

FLANGE NUT 3/8-16 #01A962

Old Part Numbers: STD-335Also used on models VT627000, VT629100, VT618202 and VT622001

.250 Thumb Screw Brass Drain Cock #01A926

Old Part Numbers: D-1403, D-1401, STD-301, ST030100AVKeep your tank from rusting. Replace this if leaking or will not work. 1/4" Thread & 9/16" Hex D-1401 supersedes to D-1403.

AXEL BOLT #01AE90

Hex Mach Head #01ABB5

BLWHP Throttle Control #01AC44

Note: order this item for models VT615208 and 4B239B.

Retaining Ring #01B038

Old Part Numbers: ST070236AV

SET SREW 38-16 X 34 #01A8CE

For flywheel, (standard thread, not metric).

PULLEY 3.0 OD X 3/4" BORE #01ABAF

Old Part Numbers: PU015400AG

BULLWHIP THROTTLE CONTROL #01ABA9

Old Part Numbers: CV006404AVNote: Order this item for 4B241B model.

Cap #01A96E

Cap for Oil Drain Extension

Plug 1/8-27 SQ HD #059484

Old Part Numbers: ST022300AV, STD-2231/8" NPT .

BEARING CAP ASSEMBLY BASIC #01A8E2

Quad Valve Plate Assembly #01A8E6

Old Part Numbers: TQ011300AJ, TQ900400AJ, VT470800AJQuad Valve Plate Assembly. Includes the valve plate with valves installed, upper and lower gaskets ONLY. This replaces part numbers TQ011300AJ, TQ900400AJ, and VT470800AJ. Torque to 200 in/lbs. Poor...

5/16-18 SPINLOCK NUT #01A980

Old Part Numbers: ST146000AV

Piston Service Kit #01A8BC

Old Part Numbers: VT-55, VT005501AGReplace this if the rings do not rotate freely in their grooves. Note: Kit does not include rings

VT Piston Ring Set #01A8F6

Old Part Numbers: 1R398, TQ900700AJThis kit will NOT fit pumps with 3" Piston! For v-twin pumps, order qty. 2 for a complete ring set! Includes rings for both pistons. This kit contains two different style rings. Install rings that match the ones being...

Gasket-inlet #01A8EA

Fits between head and filter assby. (old style)

SELF TAPPING SCREW SET (6 PK) #01A94E

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Oil Seal-vs/vt #01A8E0

Connecting Rod, MACHINING #01B036

For all VT4700 and VT4800 pumps. Replace this if broken or frozen to crankshaft. If frozen to crank, remove, then polish crank and install new rod.

Piston Pin #01A8BA

WIRE BELTGUARD BACK VT #01AFA3

Old Part Numbers: BG218700AVNote: Order this item for Model VT631800 and VT629102