PULLEY CI DG 3.5PDA 1ID 2AK39X1 #057FE7

Safety Valve #057ECF

Old Part Numbers: SV165ASME, 1/4, 165 PSI

SCREW CAP HEX HD GR5 ST BLK 5/16-18X3/4 #0579E9

SCREW,CAP,HEX HD,GR5,ST,BLK

OIL,PUMP,SYNTHETIC,BLUE,1 GALLON,ESG #057B1C

Old Part Numbers: ESG1 Gallon of Jenny Synthetic Blue Pump Oil.

Wingnut #0577DB

Old Part Numbers: L55Wingnut for old style air filter.

CAP BEARING L PUMP CI 3 HOLES PAINTED L2 #058469

G, GC, MG, L, LC, D, Repair Kit #057718

Old Part Numbers: G101, 610-1124Rebuild Kit for entire pump. Includes Rings, Gaskets, Valves and canister style Air Filter Elements. NOTES: Order L54E if you have hollow, wing nut style filters. Head gasket is for 5 hole style.  Order part # 104-1008 if...

CRANKCASE G PUMP CI MACHINED Y1A #05847B

KIT ELEMENT FILTER G54E PKG OF 4 G54EP #057A01

Old Part Numbers: G54EPPkg of four G54E Filter Elements. Element only for air filter assembly.

Crankcase Bolt #057753

Old Part Numbers: K14Crankcase bolt (oil fill), K series

KIT FILTER ASSY G154 PKG OF 4 G154P #0583F7

Old Part Numbers: G154PIncludes four G154 Filter Assemblies.

Piston Assy w/ Rings #05781B

Old Part Numbers: K132Replace this if the rings do not rotate freely in their grooves. Includes one each of: piston, ring set, bumpers and wrist pin.

Bearing, Crankshaft #0576EE

Old Part Numbers: K9Bearing for crankshaft. Order one for each side.

Valve Plate Assembly #057821

Old Part Numbers: L140Includes the valve plate, valves, upper and lower valve plate gasket.  Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem.

TUBE UNLOADER HEAD-HEAD CU MGU PUMP LU88 #057A51

Old Part Numbers: LU88Unloader  Tube w/ Fittings

BELT VEE A63 4L-650 #057911

Old Part Numbers: 4L-650Replace if frayed or slipping.

Oil Seal #0576CC

Old Part Numbers: K11EOil leaking around the shaft? Remove flywheel and replace this seal.

GU/GCU/MGU Valve Kit #05BFB7

Everything necessary to perform a valvejob (for both pump heads). With unloaders. Also includes gaskets.

G/GC/MG Valve Kit #05BFB5

Everything necessary to perform a valvejob (for both pump heads). No unloaders. Also includes gaskets.

TEE RUN BRASS 14TBX14TBX18NPTM #057CFD

Bearing #05773D

Old Part Numbers: L9If loose or dirty, replace these when rebuilding pump.

Valveplate, Bare #05775B

Old Part Numbers: L40Bare Valveplate (minus valves).

BOLT STUD HEX ST 516-18X2-14X58 K52-1 #057A99

Old Part Numbers: K52-1

PISTON PUMP ALUMINUM MACHINED K32 #057A43

Old Part Numbers: K32 Piston and bumpers (no rings).

COVER FILTER WDECALS L54 #0581B6

SCREW CAP HEXHD GR5 ST BLK 516-18X2-14 #057A45

ELBOW MALE COMPRESSION BR 14TBX18 #0577E7

1/4" x 1/8" Compression Elbow. For COPPER tubing. If you are using Nylon or Plastic tubing, consider using our T1059.

BUMPER WRIST PIN PLASTIC K36A #057749

Old Part Numbers: K36AWrist Pin Retainer (Bumper).

TEE BRANCH BRASS 14 #057781

1/8" MPT x 1/4" compression T

TUBE BREATHER BENT CU MGUGCUGTU L18 #057A3F

Old Part Numbers: L18

HEAD,START/STOP,G PUMP,CI,PAINTED,L50 #05774B

Old Part Numbers: L50Head for K pump (without unloaders).

Bracket, Filter #0579FF

Old Part Numbers: L53BRACKET,FILTER

Block, Manifold, Zinc, 6 Hole, Tapped, Mc-6 #05779F

Old Part Numbers: 150-1121, MC-5, 150-1122, MC-65-way manifold. Replace if cracked or stripped. Manifold for constant run or start/stop units.

PIN PISTON STEEL HARDENED K35 #057747

Old Part Numbers: K35Wrist Pin (Piston Pin) for conrod.

CONTROL IDLE HONDA 8HP ASSY TIC-8HG #057793

Old Part Numbers: TIC-8HGGovernor style to control engine speed for Honda models.

NUT LOCK FLANGE HEX SERR ST PLTD 516-18 #0578D5

LOCK,FLANGE,HEX,SERR,ST,PLTD,5/16-18

Tube, Manifold, Copper #057A4D

Old Part Numbers: MG59

GC Pump #05772A

NOTE: There is currently a lead time of approximately 18 weeks before this pump can ship, once ordered. Order G Pump instead. Same pump, just smaller flywheel. Must change motor pulley and belt due to G Pump having a 10.375" flywheel. Email us your...

Gasket Set #05767F

Old Part Numbers: L100All the gaskets necessary to rebuild your D, DC, DCU, G, GU, GCU, L, LC, LU, LCU, MG or MGU Pump. (Incl. L3, L4,2-K31,2-L41,2-L51)

ELEMENT FILTER AIR COMPRESSOR JENNY G54E #057A59

Old Part Numbers: G54E

CYLINDER K PUMP CI PAINTED BLUE K30 #057759

Old Part Numbers: K30Cylinders for K series and D/DC/DCU pumps.

HEAD,UNLOADING,K&G,W/1/2"PRT,7 HLE,LU180 #0576AC

Old Part Numbers: LU180Head Assy for K, G & W pump.

GU, GCU, LU, LCU, MGU Repair Kit #057681

Old Part Numbers: 610-1125, DU101, GU101Rebuild Kit for entire pump. Incl. Rings, gaskets, valves, unloaders and canister style air filter elements (L54E hollow style) for GU, GCU, MGU Pump.

NIPPLE CLOSE STEEL SCH 80 PLATED 12 #057BE2

Old Part Numbers: 122-1042-JE Jenny Pipe Nipple (122-1144)

WHEEL FL FREE 410/350X4 4"CNTRD 5/8"ID #057712

WHEEL,FL FREE,410/350X4,4”CNTRD,5/8”ID

CONNECTOR,MALE,COMPRESSION,BR,1/4TBX1/8" #057BEB

Flywheel, 13.25" OD #057761

Old Part Numbers: 220-1032, EQ2313.25" flywheel for model "DC" pump, includes K25 roll pin

GAUGE SIGHT LEVEL OIL 12NPT #0580D6

O-ring, Oil Fill #057755

Old Part Numbers: K15O-ring for oil fill bolt

GAUGE PSI 200 BK MT JENNY 1.5 14 #057BE7

Old Part Numbers: PG14 1/4" MPT Pressure gauge for tank or regulator. Buy 2 for a backup. OEM Gauge.

ELEMENT FILTER AIR COMPRESSOR JENNY L54E #05768B

Old Part Numbers: L54E 3-3/4" OD x 1-1/4" ID x 2-5/8" Ht. for A Series units. For filter assemblies with cover and wing nut. (L54E). Element only for air filter assembly.

Rollpin #05768D

Old Part Numbers: K25For flywheel. Replace when rebuilding pump. Included in the KU Rebuild Kit.