20TE8P #01AFA9

20TE8P #01AFA9

Loading Schematic

Model Numbers: 20TE8P

Repair Parts for the Coleman Sanborn model 20TE8P Portable Single-Stage Electric Oil-Bath Air Compressor

Specifications

Wheelbarrow style electric powered compressor. 7.0 cfm @ 40psi and 6.0 cfm @ 90psi

  • Min RPM 700
  • Max RPM 1200
  • Max pressure 125 psi
  • Max duty cycle 50%
  • Oil capacity 18 oz.
  • 130 Pump 6.0 cfm @ 90psi (2 HP motor)
  • 165 Pump 10.1 cfm @ 90spi (5 HP motor)
  • 39 lbs.
  • Torque specs (see Schematic on "Description" tab)
  • For 2-4.5HP units, you have a 130 pump
  • For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
  • Make sure of your pump model before ordering these parts or a new pump.
  • New pump comes with felt style air filter. Old canister style not available with new pumps.
  • New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter or simply order a short block and use your old head and flywheel)
  • If replacing valve plate or purchasing short blockplease order the felt style filter and screen as the new style valve plate will not hold any other filter setups.

Extra Details

  • Head bolt torque 220-200 in lbs.
  • Carrier bolt torque 170-230 in lbs.
  • Flywheel bolt torque 150-250 in lbs.
  • Bottom oil pan torque 30-50 in lbs.
  • Connecting rod torque 160-200 in lbs.

Extras

We have your Coleman Sanborn 20TE8P parts here. Whether you need a pressure switch, pilot valve, rings or a new pump, we have your parts. Coleman Sanborn 20TE8P parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman Sanborn 20TE8P parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates.

Video

This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.