Crankcase breather assembly for air compressor models with threaded type crankcase for the breather. This assembly tightens into the crankcase; typically has an oil-level sight gauge.

Old Part Numbers: 68-8-4, 624318Compression adapter for air compressors. 1/2" compression x 1/4" male NPT.Specifications 1/2" OD x 1/4" MIP

Old Part Numbers: E10818512" OD Flywheel for the 130/165, 753H/755H, 040-0352, 040-0354, 040-0429, and 040-0430 model air compressor pumps. NOTE: The old pump used a 10" OD flywheel, which is now...

Old Part Numbers: SRV250170, 1229O-170Air compressor safety relief valve, 1/4" MPT, 170 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Head Gasket only. We always recommend replacing all head gaskets at the same time, as the other gaskets can be compromised once the head is removed. Note: We recommend you replace the Cylinder Gasket...

Air compressor check valve, 1/2" Compression x 1/2" MPT with 1/8" hole; plug hole if not needed.  https://mastertoolrepair.com/1-8-blk-steel-plug-s-h-100b6e/ If the small unloader (bleeder) valve on...

This complete head & valveplate assy includes the complete head, felt filter with screen, 019-0240 hollow-style air filter, valve plate assy w/ valves installed, the head gasket, and cylinder gasket...

Head Gasket only. Replace if you remove the head, if leaking, or you have a loss of compression. Recommended to replace the cylinder gasket as well.

Old Part Numbers: 058-0016, 60-8/61-81/2" comp nut & sleeve for 1/2" supply tube. Order two, one for each end of the tube. 

Old Part Numbers: S118-0032Metal Filter Screen for the 130/165 Coleman Powermate/Sanborn style pumps.

Valve plate assembly (includes gaskets). Two valves are located in the head and two valves located in the valve plate (head not included). If air leaks out of the intake filter or if the compressor...

Felt air filter for the 753H air compressor pump. Replacing the pump's air filter regularly is important to maintain the performance and longevity of your air compressor. A clean filter element...

Old Part Numbers: 4L540Air compressor v-belt, 54". Replace if frayed or slipping.Specifications A-type belt, 1/2" wide Outside Dimension: 54" "A" Belt Conversion: A52

Complete gasket kit for 753H / 755H air compressor pumps, including crankshaft seal. Includes: head gasket, valve plate / cylinder gasket, crankcase gasket, bearing cover gaskets, and oil seal. If...

Old Part Numbers: 032-0091, 032-0072Oil Gight Glass with O-ring. Replace if cloudy, cracked, or leaking.

Old Part Numbers: 60-4-61-4, 058-0017-MAT1/4" compression nut and sleeve. Order two, one for each end of the tube.

Improved air compressor air filter element for the PLASTIC filter assembly. Ours is better than the OEM. Metal construction and 2 seal-tight gaskets. Replacing the pump's air filter regularly is...

Overhaul kit for the 755H in-line pump. This overhaul kit includes items the head assembly, valve plate assembly, all gaskets, connecting rods, piston rings, and rectangular felt air filter element...

OEM Powermate Inline-Twin Air Compressor Pump Replacement, Complete Assembly, Single-Stage, 3.7 HP. 13.4 CFM @ 40 PSI. 755H cast-iron pump. Includes Flywheel and Felt Air Filter. Need oil? 

Ring set (two required).

Air compressor brass compression adapter, 1/4" compression x 1/8" male NPT.Specifications 1/4" Compression x 1/8" MPT

This Valve Plate & Head Kit is primarily for gas units that need the "hockey puck" 019-0329 Solberg air filter. The kit includes: 042-0116 head & valve plate kit, 019-0329 and 019-0220 hollow-style...

Head for 755H, L710014 air compressor pump. Has TWO outlets (one for the larger supply line and one for the smaller bleeder tube). Two valves are located in the head and two valves are located in the...

Old Part Numbers: KU86 1/4" compression x 1/8" male NPT air compressor compression elbow. Note: For COPPER tubing. If you are using nylon or plastic tubing, consider using our T1059.

Air compressor pilot unloader valve, preset to cut in at 125 PSI and cut out at 155 PSI. The pilot/unloader valve is the "brains" of the air compressor, like the pressure switch on an electric air...

Old Part Numbers: 145-0388 Connects between switch and check valve in tank.

Head and valve plate-to-cylinder gaskets for the E108176 valve plate assembly.

Old Part Numbers: 051-0110Ball-bearing for crankcase (206).

Complete overhaul kit for the 755H in-line air compressor pump. This overhaul kit includes items the head assembly, valve plate assembly, all gaskets, connecting rods, piston rings, and the round,...

Old Part Numbers: 146-00255 mm key to keep flywheel from slipping.

This handy maintenance kit includes one air compressor air filter element for the PLASTIC filter assembly, and one (1) quart of high-quality full synthetic lubricant to keep your air compressor...

Ball-bearing for crankcase (205).

Complete Head/Valve Plate Assembly. Has ONE outlet in the head. Includes: Head Filter elements (canister and felt style) Valve Plate Assy with valves Head Gasket Valve Plate Gasket Head Bolts

Piston assy. (includes wrist pin and retaining rings). Two required.

Overhaul kit for the in-line, twin-cylinder 753H air compressor pump, includes complete gasket kit, conrod assembly (x2), conrod insert bearings, piston rings, head kit with air filter, valve plate...

Complete 753H air compressor pump replacement. Single-Stage, 1.9 HP. Cast-iron construction. Includes flywheel and air inlet filter. Just add oil then install your belt and discharge tube. This pump...

This handy maintenance kit includes one air compressor air filter element for the PLASTIC filter assembly, and one (1) quart of high-quality synthetic blend lubricant to keep your air compressor...

Old Part Numbers: 145-0335Transfer Supply Tube, 1/2" OD copper. Order compression nut and sleeve separately.

Valve plate with preinstalled valves. NOTE! Does not include gaskets, order the head and valve plate gaskets seperately. Poor performance or air leaks out of the intake filter while the unit is...

One Rod Assy, order qty. 2 if you need to replace both rods. For 755H pump. NOTE: New Conrods do not have Insert Bearings, change in manufacturer of the Conrod. Bearings are machined into the casting...

Old Part Numbers: 142-0114

Old Part Numbers: 142-0115Protect your fingers from moving parts. OSHA required.

Carrier (cap), drive end.

Crankshaft for 755H.

Brass manifold cross

1/8" male NPT wing nut drain cock.

Keeps your unit from slipping out of your hands.

3.45"OD x 3/4" bore.

Old Part Numbers: 145-0336

Old Part Numbers: 114-0129use with model EH5593016

Old Part Numbers: 114-0391

Old Part Numbers: 114-0017

Old Part Numbers: 114-0101Stabalizer Bar for gas units. Diminishes vibration.

Order hubcap also if needed.