Old Part Numbers: KK-4930, KK-4949Order this kit if replacing the N017592SV Valve Plate Assembly. Used on many Craftsman, DeVilbiss, DeWalt, and other units. If the compressor pump doesn't seem to...

Old Part Numbers: Z-A08548, Z-D29777Valve Plate Assembly, includes Valves and Cylinder Gasket (Head Gasket sold separately). Genuine Porter Cable replacement part. Broken valve causing slow pump up...

Replace this Tube Seal when replacing the Piston/Cylinder Kit, and if air is leaking from the head at the outlet.

Old Part Numbers: KK-4964Includes piston / rod assembly with piston ring, cylinder, and rod bearing.  If you have a sudden loss of performance, replacing the cylinder sleeve and piston ring usually...

Old Part Numbers: SRV250175, 1229O-175Air compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety...

Hose Clamp for the Discharge (Outlet) Tube/Hose.

Old Part Numbers: CAC-1199Replace this when replacing the piston/cylinder. Since the gasket is graphite, it cannot be reused if the head is removed. NOTE: Used with NEW-style valve plate.

Dayco Timing Belt. Replace if slipping or frayed.

Heavy duty 14-gauge power cord ST rated with moulded strain relief, 9/16" OD with terminals. For high-amp motors such as portable air compressors. 

Bare pump Head (no gaskets or seals included). Torque head bolts down to 52 in/lbs.

Screw for the pump head. NOTE: Torque head bolts down to 52 in/lbs.

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

Old Part Numbers: CAC-1213Isolator for the pump. Keeps the pump from vibrating against the plastic shroud.

Old Part Numbers: D24888, D30198, 5135135-00Pipe Nipple, 1/4" male NPT x 1/4" long. Don't forget to apply Teflon Tape to the threads to seal it.

Old Part Numbers: SSF-3147Part of piston/connecting rod kit.

Plastic shroud (cover) Screw, #10-9 x .500 Thd. 

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

2" OD, 200 PSI, 1/4"

Old Part Numbers: A14877, N044990, SS-1286, 5130029-00, 5131153-001/4"-18 x 1" male NPT close pipe nipple. For model D55167 type 1 & 2 and others. Remember to apply plumber's tape to the threads.

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.