1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Old Part Numbers: E107845Includes air compressor piston assembly with bearing compression ring and cylinder sleeve. This kit usually restores compression in oil-free units. Inspect the reed valves as...

Air compressor manifold assembly with regulator and couplers. Fits Husky air compressor models. The regulator controls the amount of air to your hose. If air leaks from the regulator, or when you...

Old Part Numbers: E106665 Essential for pump & motor cooling: Prevents overheating of critical components. Maintains optimal performance: Ensures your air compressor operates efficiently. Durable...

1/2" brass compression and nut and sleeve for rigid tubes. The ferrule/sleeve is built in to the nut.

O-ring, .362" ID x .103" Wide. This is the o-ring seal for the discharge tube.

Valve Plate Assembly includes the valve plate with preinstalled valves and o-ring gaskets. If air leaks out of the intake filter or if the compressor just isn't performing like it should, order this...

Outlet tube (discharge tube) from the air compressor pump to the tank. Replace if kinked or if leaking.

Air compressor air filter assembly includes element and housing. Protect your pump from damage and replace the air intake filter if it's damaged, clogged, or missing.

Old Part Numbers: N043321On/Off rocker switch for Craftsman/Husky air compressor units.

 .750-16 UNF HEX Nut. This is the threaded Nut for the Transfer Tube, where it attaches to the pump head.

Air compressor check valve, 1/2" Compression x 1/2" Male NPT. The check valve is a one-way valve that prevents air from backfeeding from the air tank. If the small unloader (bleeder) valve on or...

Bare head for the pump. No gaskets or valves included.

Poly-grooved Drive Belt for pump. Replace if frayed or slipping.VideoClick Here for installation tip.

Husky air compressor pressure switch, rated for 135/175 PSI with hose barb fitting. Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI) or if...

1/4" NPT ASME Safety Relief Valve, preset to 200 PSI.  If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.

Old Part Numbers: E108872Set of four (4) screws for the air compressor pump head.

Old Part Numbers: E106639Complete, oil-free direct-drive air compressor motor/pump assembly. Just bolt on, wire it up, hook up your discharge tube, and you're ready to go.Specifications HP: 1.7...

Set of two air compressor pressure gauges. Replace if misreading or broken.Specifications 2" face 1/4" MPT back-mount 300 PSI

Set of 4 screws

Clamps for the air compressor regulator / manifold hose. .25" ID, Set of 2

Reducer bushing for air tank. Does NOT include the O-ring, order separately.

Hose that connects to the air compressor pressure switch.

Order if frayed or missing ground blade.

Set of two (2) shoulder bolts for the air compressor wheels.

Console cover that installs over the air compressor pressure gauges and manifold.

Kit of 2

9" diameter wheel. Order hubcap also if needed.

Left-side plastic shroud that covers the air compressor motor.

Right-side plastic shroud that covers the air compressor motor.