Old Part Numbers: Z-A08548, Z-D29777Valve Plate Assembly, includes Valves and Cylinder Gasket (Head Gasket sold separately). Genuine Porter Cable replacement part. Broken valve causing slow pump up...

Replace this Tube Seal when replacing the Piston/Cylinder Kit, and if air is leaking from the head at the outlet.

Old Part Numbers: AB-9053138, AB-9050373, ST070324AV, 90503731/4" MPT x 1.5" steel pipe nipple. Be sure to apply plumber's tape on the threads before installation.

Old Part Numbers: KK-4964Includes piston / rod assembly with piston ring, cylinder, and rod bearing.  If you have a sudden loss of performance, replacing the cylinder sleeve and piston ring usually...

Old Part Numbers: SRV250175, 1229O-175Air compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety...

Hose Clamp for the Discharge (Outlet) Tube/Hose.

Old Part Numbers: CAC-1199Replace this when replacing the piston/cylinder. Since the gasket is graphite, it cannot be reused if the head is removed. NOTE: Used with NEW-style valve plate.

Screw (fastener) for the motor/pump shroud.

Dayco Timing Belt. Replace if slipping or frayed.

Plastic Cooling Fan for the motor. Replace if damaged or missing any cooling fins so your pump doesn't overheat.

Cylinder gasket. This is the gasket in between the valve plate and piston/cylinder.

Includes all internal parts to repair the air compressor air regulator. NOTE! For Manifolds MADE IN CHINA (See label on back). The regulator controls the amount of air to your hose. Replace this if...

Air compressor regulator knob.

Rubber Foot. Click Here to find a replacement rubber foot.

Bare pump Head (no gaskets or seals included). Torque head bolts down to 52 in/lbs.

Screw for the pump head. NOTE: Torque head bolts down to 52 in/lbs.

Includes all internal parts to repair the air compressor air regulator. NOTE! For Manifolds MADE IN TAIWAN (see label on back). The regulator controls the amount of air to your hose. Replace this if...

Old Part Numbers: A05802, N003307

Old Part Numbers: D29132 Also available in Fastener Kit # KK-4929.

Replace if misreading or broken.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Screw for the piston rod cover.

Old Part Numbers: CAC-1213Isolator for the pump. Keeps the pump from vibrating against the plastic shroud.

Old Part Numbers: SSF-3147Part of piston/connecting rod kit.

Plastic shroud (cover) Screw, #10-9 x .500 Thd. 

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

Old Part Numbers: A17717, z-A07456, Z-A07456Replace if misreading or broken.

Old Part Numbers: N021824, N021824SV, N383162Complete Regulator/Manifold Assembly. Includes the Manifold, Air Regulator, Pressure Gauges, and Couplers. Replace if the manifold is damaged or leaking,...

Old Part Numbers: N027840

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.