Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

O-ring Seal for the discharge (outlet) tube to the pump head.

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Order this if ordering valve plate or a new head.

Hose Clamp for the Discharge (Outlet) Tube/Hose.

Screw (fastener) for the motor/pump shroud.

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss...

Replacement Air Filter Element for Twist-Lock Air Filter Assembly for air compressors. Filter element only (diameter is 2-3/8" and height is 1"). Replacing the pump's air filter regularly is...

Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

Old Part Numbers: D24345, WL011900AVAir compressor air filter assembly with the element. 3/8" NPT, plastic nipple. The interior paper element is not available separately. Click here to upgrade to a...

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: SST-108, A14785Rubber air compressor isolators with screws, three (3) included.

For Regulator Manifold.