Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

There are several different air compressor cooling fan styles. Choose this if yours looks like this one. Replace if cracked or missing fins.

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: GA0125200, PG0125200BKAir Compressor Pressure Gauge, 1/8" MPT, Back-Mount, 200 PSI, 1.5" Face. Replace if misreading or broken.Specifications PSI: 0-200 PSI MPT: 1/8" MPT Dial /...

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Order this if ordering valve plate or a new head.

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Brass compression nut and sleeve for 3/8" OD tubes.

Hose Clamp for the Discharge (Outlet) Tube/Hose.

Screw (fastener) for the motor/pump shroud.

Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

1/4" male NPT x 1/8" female NPT brass bushing reducer for air compressors.

Old Part Numbers: Z-A13369Regulator Manifold Assembly. Includes the Air Regulator, Couplers, and Hose Barb Fitting. The regulator controls the amount of air in your air compressor hose. Replace this...

Old Part Numbers: SSW-7367Strain relief for air compressor power cord going into the pressure switch housing.

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: SST-108, A14785Rubber air compressor isolators with screws, three (3) included.

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

For Regulator Manifold.

Old Part Numbers: K-0286