1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Order this if ordering valve plate or a new head.

Old Part Numbers: N043321On/Off rocker switch for Craftsman/Husky air compressor units.

Screw for the plastic motor/pump shroud.

Hose Clamp for the Discharge (Outlet) Tube/Hose.

Rubber o-ring for air compressors, .362ID x .103W. This is the o-ring seal for the pump end of the outlet tube.

Old Part Numbers: N011005, A12210Replaces the A12210 belt. Replace your air compressor drive belt if it is frayed or loose.Specifications Overall Length: 30-1/2" Half Length: 15-1/4" Width:...

1/2" compression nut and sleeve, brass.

Air compressor pressure switch. 180/225 PSI (cut-in and cut-out PSI). Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI), if the unit doesn't...

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Keep your pump running cool by replacing the fan if any fins are missing or damaged.

Poor performance or air leaks out of the intake filter while the unit is running? The valve plate assembly is probably the problem.

Old Part Numbers: D24345, WL011900AVAir compressor air filter assembly with the element. 3/8" NPT, plastic nipple. The interior paper element is not available separately. Click here to upgrade to a...

Old Part Numbers: D29132 Also available in Fastener Kit # KK-4929.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: 1000000249, A12191, N037988, N037988SV, N041594SVNew, complete motor/pump assembly for the DeWalt D55168 air compressor (and others). Includes the complete oil-free, direct-drive,...

Old Part Numbers: 5130032-00For model D55167 type 2 & 3 and others.

Old Part Numbers: A12477Bare Head for Pump.

Old Part Numbers: D20675, AC80-B, A19513

Cylinder sleeve for pump. For model D55127 type 1 & 2 and others. Usually replaced with the piston compression ring.

1.25 OD 18

Isolator for the pump/motor assembly. Keep your pump running smoothly and replace if damaged or missing!

Old Part Numbers: AB-9069180

Old Part Numbers: AB-9064905

Old Part Numbers: AB-9270052

Old Part Numbers: AB-9270051

Old Part Numbers: A13005For model D55127 type 1 & 2

The DeWalt D55146 Heavy-Duty 4.5 Gallon, 225 PSI, Hand Carry Compressor with Wheels is quiet, efficient and solidly built, and is constructed to withstand harsh jobsite conditions. Its dual...

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.