Regulator Bracket Kit #05C00F

Fits on brace of wheelbarrow-style tanks for installing a Regulator. Includes 3/8" Hose, Hose Clamps, Nipple/Bracket Assby., Barbed Hose Elbows complete with Nuts and Bolts (only includes reference numbers shown).

Oil Drain Tube For GX240-GX390, 12mm #07F9C4

Stop making a mess! This oil drain tube makes changing your oil easy. Simply remove your oil drain plug and install the metric threaded end into your engine block. Changing oil has never been so easy!Technical Documents Click here to view install...

Regulator, 3/8" #07F8DD

Old Part Numbers: 160-1001, MFREG0375Norgren Regulator. 3/8inch inlet and outlet. 250 lbs. max psi. Two 1/4inch ports available on either side of regulator for gauge location (gauge sold separately).

Safety Valve #057ECF

Old Part Numbers: SV165ASME, 1/4, 165 PSI

SCREW CAP HEX HD GR5 ST BLK 5/16-18X3/4 #0579E9

SCREW,CAP,HEX HD,GR5,ST,BLK

G, GC, MG, L, LC, D, Repair Kit #057718

Old Part Numbers: G101, 610-1124Rebuild Kit for entire pump. Includes Rings, Gaskets, Valves and canister style Air Filter Elements. NOTES: Order L54E if you have hollow, wing nut style filters. Head gasket is for 5 hole style.  Order part # 104-1008 if...

KIT ELEMENT FILTER G54E PKG OF 4 G54EP #057A01

Old Part Numbers: G54EPPkg of four G54E Filter Elements. Element only for air filter assembly.

Crankcase Bolt #057753

Old Part Numbers: K14Crankcase bolt (oil fill), K series

BELT VEE A48 4L500 #05778F

Old Part Numbers: 4L-500, 4L500Heavy duty belt for G8HGA.

CLAMP HOSE GEAR WORM SS 516 #057A80

5/8.

Valve Plate Gasket #05799D

Old Part Numbers: L41

Aftercooler Supply Tube #057791

Old Part Numbers: 610-1075, 610-1078, 610-1143Replace this if bent, kinked or leaking.

SCREW ROD STEEL WLOCK WASHER 14-20 L22 #057807

Old Part Numbers: L22

Piston Assy w/ Rings #05781B

Old Part Numbers: K132 Replace this if the rings do not rotate freely in their grooves.  Includes one each of: piston, ring set, bumpers and wrist pin.  

Bearing, Crankshaft #0576EE

Old Part Numbers: K9Bearing for crankshaft. Order one for each side.

Valve Plate Assembly #057821

Old Part Numbers: L140Includes the valve plate, valves, upper and lower valve plate gasket.  Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem.

TUBE UNLOADER HEAD-HEAD CU MGU PUMP LU88 #057A51

Old Part Numbers: LU88Unloader  Tube w/ Fittings

VALVE DISCHARGE ASSY K146 #0576FC

Old Part Numbers: K146

Oil Seal #0576CC

Old Part Numbers: K11EOil leaking around the shaft? Remove flywheel and replace this seal.

BRACKET REGULATOR WHARDWARE ASSY BR #057738

Welded nipple and bracket.

VALVE,CHECK,BUMPER,STEEL,K44 #0579F9

Old Part Numbers: K44

HOSE AIR 200 PSI 38 #058C99

GU/GCU/MGU Valve Kit #05BFB7

Everything necessary to perform a valvejob (for both pump heads). With unloaders. Also includes gaskets.

NUT LOCK FLANGE HEX SERR ST PLTD 14-20 #0578E5

LOCK,FLANGE,HEX,SERR,ST,PLTD,1/4-20

G/GC/MG Valve Kit #05BFB5

Everything necessary to perform a valvejob (for both pump heads). No unloaders. Also includes gaskets.

Bearing #05773D

Old Part Numbers: L9If loose or dirty, replace these when rebuilding pump.

VALVE UNLOADER CENTRIFICAL ASSY EQ174 #0576B4

Old Part Numbers: 120-1170If yours leaks or does not unload the pump to start, try replacing this assembly. Located on the end of your pump. Has a supply line that runs to the head.

PISTON PUMP ALUMINUM MACHINED K32 #057A43

Old Part Numbers: K32 Piston and bumpers (no rings).

BARB,HOSE,MALE,BRASS,3/8HSX3/8NPTM #057A7E

3/8 X 3/8.

GASKET CYLINDER KGW PUMP 132THK K31 #05772E

Old Part Numbers: K31

SCREW CAP HEXHD GR5 ST BLK 516-18X2-14 #057A45

WASHER BRASS 132X 0.605ODX14 ID KU84 #057A25

Old Part Numbers: KU84WASHER,BRASS

KIT RING OIL WEXPANDER ASSY K34 #057785

Old Part Numbers: K34Oil Ring w/ Expander.

ELBOW MALE COMPRESSION BR 14TBX18 #0577E7

1/4" x 1/8" Compression Elbow. For COPPER tubing. If you are using Nylon or Plastic tubing, consider using our T1059.

TUBE CONTROL NYLON WSLEEVE 14X14LG #0583A7

For Models: G8GA, G8CGA, G8KGA & G8HGA

RING O SILICON 716 #0577CF

Old Part Numbers: KU82 Replaceable o-ring for KU181 unloaders.

BUMPER WRIST PIN PLASTIC K36A #057749

Old Part Numbers: K36AWrist Pin Retainer (Bumper).

TEE BRANCH BRASS 14 #057781

1/8" MPT x 1/4" compression T

TUBE BREATHER BENT CU MGUGCUGTU L18 #057A3F

Old Part Numbers: L18

HEAD,START/STOP,G PUMP,CI,PAINTED,L50 #05774B

Old Part Numbers: L50Head for K pump (without unloaders).

Block, Manifold, Zinc, 6 Hole, Tapped, Mc-6 #05779F

Old Part Numbers: 150-1121, MC-5, 150-1122, MC-65-way manifold. Replace if cracked or stripped. Manifold for constant run or start/stop units.

SPRING CONE SS VALVE DISCHARGE K46 #057815

Old Part Numbers: K46(1)

PIN PISTON STEEL HARDENED K35 #057747

Old Part Numbers: K35Wrist Pin (Piston Pin) for conrod.

GCU Pump #05772C

NOTE: There is currently a lead time of approximately 18 weeks before this pump can ship, once ordered. Order GU Pump instead. Same pump, just smaller flywheel. Must change motor pulley and belt due to GU Pump having a 10.375" flywheel. Email us your...

Axle #0577AB

Axle for wheelbarrow units

CONTROL IDLE HONDA 8HP ASSY TIC-8HG #057793

Old Part Numbers: TIC-8HGGovernor style to control engine speed for Honda models.

Retainer, Internal #057A27

Old Part Numbers: KU85

Intake Valve #0576FA

Old Part Numbers: K145

Tube, Manifold, Copper #057A4D

Old Part Numbers: MG59

GC Pump #05772A

NOTE: There is currently a lead time of approximately 18 weeks before this pump can ship, once ordered. Order G Pump instead. Same pump, just smaller flywheel. Must change motor pulley and belt due to G Pump having a 10.375" flywheel. Email us your...

Gasket Set #05767F

Old Part Numbers: L100All the gaskets necessary to rebuild your D, DC, DCU, G, GU, GCU, L, LC, LU, LCU, MG or MGU Pump. (Incl. L3, L4,2-K31,2-L41,2-L51)

SPRING CONE SS VALVE INTAKE K45 #057813

Old Part Numbers: K45(1)