1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Old Part Numbers: 9051131Air compressor regulator / manifold assembly. The regulator controls the amount of air to your hose. If air leaks from the regulator, or when you turn the knob, it doesn't adjust the PSI up or down, replace this part. Note: If...

On at 125 PSI, Off 155 PSI. Switch has two 1/4" ports and two 3/8" ports. Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI), if the unit doesn't turn on or off, or if there is an obvious air leak...

Discharge tube elbow that connects the air compressor discharge tube to the pump head.

Old Part Numbers: 6750400Top Head Gasket for pump. Also recommended to replace the Cylinder Gasket when you replace the Head Gasket.

Old Part Numbers: 540051, AB-0540051Air compressor valve plate assembly. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem. Order if valve is broken. Also order head gasket and cylinder gasket...

Old Part Numbers: D21929, Z-D21929Pressure Gauge for air compressors.Specifications 0-240 PSI 1/4" MPT Back-Mount 2.1" Face

Sending pipe only. Replace if the tube is kinked or leaking. To find out if it's leaking, spray soapy water on the tube and if you see any bubbles, you have a leak. Tip: Replace both compression nuts and both compression sleeves (ferrules) when...