Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

Keep your air compressor from sliding all around your vehicle or floor. Order extra for future use.Specifications Height: 3/4"  Diameter: 1-1/2"

Old Part Numbers: SRV250170, 1229O-170Air compressor safety relief valve, 1/4" MPT, 170 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Motor bracket mill for air compressors. The motor bracket mill provides a stable platform for the air compressor motor to operate smoothly and efficiently. 

Old Part Numbers: ST073919AV, WL012000AV, WL012300AV Filter - All plastic, 1/2" MPT. Uses the 04 element, 2" diameter. Order extra for a backup. Replace this often to keep your pump from damage...

Flat-head machine screw for the piston rod.  SpecificationsMust torque to 300 in/lbs.

Old Part Numbers: 3168Air compressor pressure switch/manifold pipe plug, 1/4"-18 male NPT. A very common hex plug used on countless air compressors, this 1/4" NPT countersunk hex plug installs into...

Old Part Numbers: CW210000AV, EV1WSI Condor unloader valve for MDR21130 and other popular pressure switches. Replace this valve if air constantly leaks from the valve while the unit is running, or if...

Old Part Numbers: ST119301AV, QR1/8" NPT x 1/4" nylon tube. This allows 1/4" nylon tubing to push to fit into this fitting. The 1/8" MPT threads screw into the unloader area of the air compressor...

Air Compressor Pressure Switch, 120/150 PSI. Replace the pressure switch if the compressor no longer cuts in or cuts out at the designated pressure (PSI), if the unit doesn't turn on or off, or if...

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: WL000302AVPump Head for many "WL" series Campbell Hausfeld, Speedaire, and Ridgid air compressors. Bare head, no gaskets included.

Old Part Numbers: ST117804AV, ST117802AV1/4" OD Unloader/Bleeder Tube, 19" length. This is the tube that routes from the pressure unloader valve to the in-tank check valve, which unloads the head...

Use this nylon tube if your air compressor pressure switch has a plastic unloader valve with a quick-connect fitting. Note: sold by the foot (quantity of 1 = 1 foot or 12 inches of tubing).

Head Bolt Kit (set of 4ea. , part #11)  Torque to 100 In-Lbs.