Replace this seal when replacing the piston / cylinder kit, and if air is leaking from the head at the outlet.

Old Part Numbers: Z-A08548, Z-D29777Broken valve causing slow pump up or no compression at all? Replace this valve plate kit to restore compression (make sure piston and cylinder are not worn as well). NOTE: The D30139 Gasket Kit must be...

Old Part Numbers: SSW-7367Strain relief for air compressor power cord going into the pressure switch housing.

Old Part Numbers: Z-A04615, A16342, Z-D23584, N036515SV, N039790Pump and motor assembly for air compressors (does not include plastic cover or pump head). NOTE! The four bolt holes in the base of the pump, where the valve plate and head bolt onto,...

Bare pump Head (no gaskets or seals included). Torque head bolts down to 52 in/lbs.

One roll of 1/2" wide teflon (plumber's tape) tape, 520" length. Used for air compressor repairs. This should be in everyone's garage and tool bag! Use on all standard NPT threaded connections on your air compressor to prevent air leaks. A...

Old Part Numbers: CAC-1213Isolator for the pump. Keeps the pump from vibrating against the plastic shroud.