Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

There are several different air compressor cooling fan styles. Choose this if yours looks like this one. Replace if cracked or missing fins.

Adjustable air regulator assembly for air compressor units that have a 4-port pressure switch. 1/4" FPT inlet/outlet, 1/8" FPT port for pressure gauge (to maximize performance, we recommend including...

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: GA0125200, PG0125200BKAir Compressor Pressure Gauge, 1/8" MPT, Back-Mount, 200 PSI, 1.5" Face. Replace if misreading or broken.Specifications PSI: 0-200 PSI MPT: 1/8" MPT Dial /...

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Order this if ordering valve plate or a new head.

Old Part Numbers: SRV250150Air compressor safety relief valve, 1/4" MPT, 150 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Brass compression nut and sleeve for 3/8" OD tubes.

New style filter assembly with 3/8" threads. Includes new style air filter, head, and o-ring. Note: Do NOT order if your head has 2 holes on the SAME side of the head. This head has 3/8" FPT threaded...

Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

1/4" male NPT x 1/8" female NPT brass bushing reducer for air compressors.

Old Part Numbers: SSW-7367Strain relief for air compressor power cord going into the pressure switch housing.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Plastic shroud (cover) Screw, #10-9 x .500 Thd. 

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Old Part Numbers: A14877, N044990, SS-1286, 5130029-00, 5131153-001/4"-18 x 1" male NPT close pipe nipple. For model D55167 type 1 & 2 and others. Remember to apply plumber's tape to the threads.

Old Part Numbers: SSP-9013, 5130039-00Brass insert for nylon tubing that stiffens the end of the tube. For model D55167 type 1 and others.

Old Part Numbers: CAC-1085(Warm tube before installing on # 50).

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.

Old Part Numbers: SS-6506-CD, SSN-60-ZN, 5140018-43 item. Please order replacement item.