Old Part Numbers: ST067300AV, HF004500AVThis Ferrule is placed inside a compression nut to help stop air leaks. Genuine OEM replacement part.

Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 61-8

Top Head Gasket for Oil-Free "WL"-series Campbell Hausfeld pumps and Oil-Free "OF"-series Ridgid pumps.

Air compressor regulator without decal. 1/4" FPT inlet/outlet, 1/8" FPT side port for a pressure gauge (to maximize perform

Exhaust Valve Gasket. This is the first gasket that is directly under the pump head.

Old Part Numbers: CV221502AJ, CV221502SJ, CTD1212QR1/2" Compression x 1/2" MPT air compressor check valve with quick-release fitting for unloader/bleeder tube. The check valve is a one-way valve that...

Cylinder Gasket. This is the bottom gasket that sites directly on top of the cylinder sleeve.

Old Part Numbers: 68-8-6Air compressor compression adapter, 1/2" compression x 3/8" MPT, no lead. Use this to attached the discharge tube to the pump's discharge outlet.

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Motor bracket mill for air compressors. The motor bracket mill provides a stable platform for the air compressor motor to operate smoothly and efficiently. 

Old Part Numbers: WL011200APDischarge (transfer) tube used on many Campbell Hausfeld oil-free air compressors. Includes the 1/2" copper tube and silicone sleeves.

Flat-head machine screw for the piston rod.  SpecificationsMust torque to 300 in/lbs.

Old Part Numbers: 31551/4" MPT to 1/8" FPT bushing adapter. If you need a 1/4" MPT fitting, but the part you have is only 1/8" MPT, then use this bushing adapter.

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: ST070387AV-MAT1/4"-18 NPT x 2.5" long pipe nipple for air compressors. Don't forget to apply plumbers' (teflon) tape to the threads for a tight seal.Extra DetailsIf you have a...

Old Part Numbers: STD-3353/8"-16 flange nut. Also used on models VT627000, VT629100, VT618202 and VT622001.

Old Part Numbers: WL000302AVPump Head for many "WL" series Campbell Hausfeld, Speedaire, and Ridgid air compressors. Bare head, no gaskets included.

Old Part Numbers: ST117804AV, ST117802AV1/4" OD Unloader/Bleeder Tube, 19" length. This is the tube that routes from the pressure unloader valve to the in-tank check valve, which unloads the head...

Old Part Numbers: STD-334Axle Bolt for the wheel (order two if you need the bolt for two wheels). Note: Also used on models VT627000, VT629100, VT618202, and VT622001.

Head Bolt Kit (set of 4ea. , part #11)  Torque to 100 In-Lbs.