Compression Conn Fitting Assembly 1/2 X 3/8 MPT #01A902

Old Part Numbers: ST159001AV, ST159001AJCompression Connector, 1/2" Comp X 3/8" MPT. 

3 PORT REGULATOR #01A92E

Old Part Numbers: RE206901AV, RE206200AVAdjustable air pressure knob assembly. (Gauge sold separately).

Flat Washer #01AE80

Old Part Numbers: ST000600AV(1/4)

Pressure Gauge, Right-mount, 1.5 IN 300 PSI GAUGE 1/8" NPT LOW #01A8A6

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV0-300 PSI, 1/8" NPT, Right-mount, 1.625" FACE

DISCHARGE VALVE #01CEFD

ASME SAFETY VALVE 140 PSI 1/4 NPT #01ACAC

Old Part Numbers: V-203600BLRating 140 PSI If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature. Used with WL650801.

Motor Bracket - Mill #01A9E8

Unloader Tube (Teflon) #01AAAF

Old Part Numbers: ST117804AV

MOLDED FERRULE, 1/2" #01AF4F

Old Part Numbers: ST067300AV, HF004500AV

Exhaust Valve Gasket #01B5F0

Cylinder Gasket #01B5EE

FLANGE NUT 3/8-16 #01A962

Old Part Numbers: STD-335Also used on models VT627000, VT629100, VT618202 and VT622001

.250 THUMB SCREW BRASS DRAIN COCK #01A926

Old Part Numbers: D-1403, D-1401, STD-301, ST030100AVKeep your tank from rusting. Replace this if leaking or will not work. 1/4" Thread & 9/16" Hex D-1401 supersedes to D-1403.

Axle Bolt Hex Head #01A960

Old Part Numbers: STD-334Note: Also used on models VT627000, VT629100, VT618202, and VT622001

Tube Kit #01AA9F

Old Part Numbers: WL014000APNote: Also used on models WL650203, WL650602, WL650702AJ, WL650703, WL650700AJ, WL650900AJ. WL651101.  Tube may be longer than your original. Per the factory, cut the tube to fit your model.

14-18 NPT STEEL NIPPLE #01A9FF

Old Part Numbers: HF-24, HF002400AV, HF007301AV

MILL ECONO CHECK VALVE W/ PUSH FIT #01AACF

Old Part Numbers: CV222200AV, CV222201AJ, CV222201AVIf your pressure switch is leaking from the unloader valve, replace this part. Includes the unloader tube fitting. Simply remove one plug and insert the quick release connector for units that use this...

RUBBER FOOT 1.25" #01AA07

Note: Also used on model WL650602, WL650703, WL651004, WL650700AJ.

Compression Nut #01AF47

POWERCORD & PLUG #01E0AE

For 120/240 volt models.

WHEEL, 10" BLACK HUB #01A95E

Old Part Numbers: WA-25, WA002500AV, WA003900AV, WA002400AV, WA002401AVOrder hubcap also if needed. For WL611700AJ Compressor. For WL611800 Compressor and others.

WL HEAD WFILTER HOLDER #01A8FA

Old Part Numbers: WL000302AV

Flat Head Mach Screw #01A8FE

Head Bolt Kit #01A906

Head Bolt Kit (set of 4ea. , part #11)

SELF TAPPING SCREW SET (6 PK) #01A94E

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

PRESSURE SWITCH 100/125 P/S MILL CONDOR #01AE11

100 - 125 PSI

INTAKE VALVE #01CF25

HEAD GASKET, OILLESS #01ABC3

Isolation Pad-Cut Sheet #01AEB0