Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 61-8

Air compressor regulator without decal. 1/4" FPT inlet/outlet, 1/8" FPT side port for a pressure gauge (to maximize perform

Old Part Numbers: AB-9053138, AB-9050373, ST070324AV, 90503731/4" MPT x 1.5" steel pipe nipple. Be sure to apply plumber's tape on the threads before installation.

Old Part Numbers: 68-8-6Air compressor compression adapter, 1/2" compression x 3/8" MPT, no lead. Use this to attached the discharge tube to the pump's discharge outlet.

Motor bracket mill for air compressors. The motor bracket mill provides a stable platform for the air compressor motor to operate smoothly and efficiently. 

Old Part Numbers: WL011200APDischarge (transfer) tube used on many Campbell Hausfeld oil-free air compressors. Includes the 1/2" copper tube and silicone sleeves.

Pressure Switch with cut-in and cut-out pressure of 100/125 PSI. On/off lever switch and quick-connect unloader valve. Replace the pressure switch if the compressor no longer cuts in or cuts out at...

Flat-head machine screw for the piston rod.  SpecificationsMust torque to 300 in/lbs.

Plastite screw, 5/8" long. Screw for the plastic shroud, belt guard, etc. Note: Also used on models WL650103, WL651900, WL650703, WL651004, WL651000AJ.Specifications5/8" long

Old Part Numbers: WL015303SJ, BT011901AV, BT012100AVIncludes Belt, Check Valve, and Bolt.SpecificationsAC0-High Temperature Belt Technical Specifications:    (Inches)       (mm)Outside Circumference ...

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: WA-25, WA002500AV, WA003900AV, WA002400AV, WA002401AVOrder hubcap also if needed. For WL611700AJ Compressor. For WL611800 Compressor and others. NOTE! In June 2000, the manufacturer...

Old Part Numbers: ST070387AV-MAT1/4"-18 NPT x 2.5" long pipe nipple for air compressors. Don't forget to apply plumbers' (teflon) tape to the threads for a tight seal.Extra DetailsIf you have a...

Old Part Numbers: STD-3353/8"-16 flange nut. Also used on models VT627000, VT629100, VT618202 and VT622001.

Old Part Numbers: WL000302AVPump Head for many "WL" series Campbell Hausfeld, Speedaire, and Ridgid air compressors. Bare head, no gaskets included.

Old Part Numbers: ST117804AV, ST117802AV1/4" OD Unloader/Bleeder Tube, 19" length. This is the tube that routes from the pressure unloader valve to the in-tank check valve, which unloads the head...

Old Part Numbers: STD-334Axle Bolt for the wheel (order two if you need the bolt for two wheels). Note: Also used on models VT627000, VT629100, VT618202, and VT622001.

Old Part Numbers: ST000600AV(1/4)

For 120/240 volt models.