Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Old Part Numbers: 61-8

Air compressor regulator without decal. 1/4" FPT inlet/outlet, 1/8" FPT side port for a pressure gauge (to maximize perform

Old Part Numbers: AB-9053138, AB-9050373, ST070324AV, 90503731/4" MPT x 1.5" steel pipe nipple. Be sure to apply plumber's tape on the threads before installation.

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Old Part Numbers: WL014000APThis air compressor discharge (transfer) tube may be longer than your original. Per the factory, cut the tube down to fit your model. Includes the tube and rubber ferrules...

Motor bracket mill for air compressors. The motor bracket mill provides a stable platform for the air compressor motor to operate smoothly and efficiently. 

Pressure Switch with cut-in and cut-out pressure of 100/125 PSI. On/off lever switch and quick-connect unloader valve. Replace the pressure switch if the compressor no longer cuts in or cuts out at...

Plastite screw, 5/8" long. Screw for the plastic shroud, belt guard, etc. Note: Also used on models WL650103, WL651900, WL650703, WL651004, WL651000AJ.Specifications5/8" long

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: WA-25, WA002500AV, WA003900AV, WA002400AV, WA002401AVOrder hubcap also if needed. For WL611700AJ Compressor. For WL611800 Compressor and others. NOTE! In June 2000, the manufacturer...

Old Part Numbers: ST070387AV-MAT1/4"-18 NPT x 2.5" long pipe nipple for air compressors. Don't forget to apply plumbers' (teflon) tape to the threads for a tight seal.Extra DetailsIf you have a...

Old Part Numbers: STD-3353/8"-16 flange nut. Also used on models VT627000, VT629100, VT618202 and VT622001.

Old Part Numbers: ST117804AV, ST117802AV1/4" OD Unloader/Bleeder Tube, 19" length. This is the tube that routes from the pressure unloader valve to the in-tank check valve, which unloads the head...

Old Part Numbers: STD-334Axle Bolt for the wheel (order two if you need the bolt for two wheels). Note: Also used on models VT627000, VT629100, VT618202, and VT622001.